We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal casting machine with black vacuum hood and pressure gauge on top

HNZXIB

HNZXIB buffer 36952 plier 110V 1500W 1100°C 48min

SKU CH-8VPV-CGVPN

Jewellery casting machine melts metals up to 1100 °C in 48 minutes with 1500 W vacuum system

  • Typebuffer_36952
  • 8-in-1 casting kit includes crucible, tongs, compressor cable, gasket, gloves, bell and vacuum hood
  • Vacuum hood of thick aviation plastic reduces burrs and bubbles for smoother castings
  • Built-in pressure gauge lets you monitor and adjust pressure for consistent surface finish
  • 1500 W furnace reaches 1100 °C and melts compatible metals in 48 minutes
  • Suitable for gold, silver, copper, brass, bronze, aluminium and other fast-melting metals

2KG vacuum casting machine

The HNZXIB buffer 36952 is an 8-in-1 jewelry casting machine that combines melting, vacuum investing and casting in one unit. It runs on 110V mains power and draws 1500W to reach a maximum temperature of 1100°C.

For jewellers casting gold, silver.

This machine suits workshops that need to melt up to 2KG of metal and cast under vacuum to reduce bubbles and burrs. It is not for users who require higher melting temperatures, larger crucible capacities or three-phase power supply.

Check your workshop power and ventilation

Verify that your bench has a dedicated 110V circuit able to support 1500W continuous draw. Ensure adequate fume extraction or ventilation for melting metals at 1100°C and allow 48 minutes for a full heat cycle before casting.

Highlights

  • 8-in-1 casting kit includes crucible, tongs, compressor cable, gasket, gloves, bell and vacuum hood
  • Vacuum hood of thick aviation plastic reduces burrs and bubbles for smoother castings
  • Built-in pressure gauge lets you monitor and adjust pressure for consistent surface finish
  • 1500 W furnace reaches 1100 °C and melts compatible metals in 48 minutes
  • Suitable for gold, silver, copper, brass, bronze, aluminium and other fast-melting metals

Specifications

BrandHNZXIB
Typebuffer_36952

Questions about this item

What electrical supply is required for the 110V 1500W buffer 36952?

The machine runs on a standard 110 V supply and draws 1500 W, so a 15 A circuit or higher is needed.

Can the 1100 °C furnace melt the same metals I currently process with a lower-temperature torch?

It melts gold, silver, copper, brass, bronze, aluminium and other metals with melting points below 1100 °C, covering most common jewellery alloys.

How do I confirm the vacuum hood is pulling correctly during a cast?

Watch the pressure gauge on the metal cover shell; a steady reading shows the vacuum hood is reducing bubbles and burrs as designed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.