We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Henry HE107046 sealer dampproofer .9 gal black container

Henry

Henry HE107046 Sealer & Dampproofer .9 gal Black

SKU CH-G7QA-VPBMZ

Water-based asphalt sealer and dampproofer covers 100 sq ft per gallon, dries in 6 hours, and applies between 50 and 70 degrees Fahrenheit

  • TypeCaulks
  • Seals and damp-proofs foundations with water-based asphalt formula
  • Low-odour application from zero VOC content
  • Covers up to 100 sq ft per .9 gal container
  • Ready for next coat in 6 hours drying time
  • Apply in 50 to 70 degrees Fahrenheit for best results

Sealer & Dampproofer 0.9 gal

Henry HE107046 Sealer & Dampproofer is a water-based asphalt coating supplied in a 0.9 gal black container. It is intended for builders and homeowners who need a dampproofing layer on foundation walls or similar below-grade surfaces.

Application temperature and VOC

The product applies between 50 and 70 degrees F and carries a VOC content of 0 g/L. Low odour and water-based chemistry keep the jobsite comfortable during normal brush or roller work.

Coverage and dry time

One gallon covers approximately 100 sq ft and reaches a dry state in about 6 hours. Extended wet conditions or thicker coats will lengthen the cure, so plan the schedule for sustained exposure rather than a quick recoat.

Highlights

  • Seals and damp-proofs foundations with water-based asphalt formula
  • Low-odour application from zero VOC content
  • Covers up to 100 sq ft per .9 gal container
  • Ready for next coat in 6 hours drying time
  • Apply in 50 to 70 degrees Fahrenheit for best results

Specifications

TypeCaulks
BrandHENRY

Questions about this item

How do I apply the sealer, and what is the common mistake with temperature?

Apply the sealer at 50 to 70 degrees F. The step people get wrong is working outside this range, which prevents proper curing.

What maintenance will the sealed surface need later?

Inspect the asphalt-based coating annually for cracks or wear. Reapply to damaged areas to maintain the dampproofing barrier.

What limit appears first during sustained exposure?

The 100 sq ft per gallon coverage rate is the first limit. Exceeding it reduces film thickness and compromises water resistance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.