We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey CPVC true-union ball valve with tee handle, 2 inch full port, 250 psi rating

Hayward Flow Control

Hayward Flow Control TBH2200ASTV0000 Ball Valve 2 in 250 psi

SKU CH-X5DN-AE8PJ

Two-way ball valve in CPVC handles corrosive chemicals and water at up to 250 psi with a full-port design and locking tee handle

  • True union design enables easy inline maintenance
  • CPVC body and ball resist corrosive chemical media
  • Full-port construction provides unrestricted flow path
  • Locking tee handle secures valve position safely
  • Rated for 250 psi maximum operating pressure

Two-Inch CPVC Ball Valve

The Hayward Flow Control TBH2200ASTV0000 is a manual two-way ball valve built from CPVC for handling corrosive chemicals and water. Its three-piece true-union body allows inline servicing without cutting pipe. A full-port CPVC ball matches the 2 in nominal size for unrestricted flow. The valve carries a 250 psi maximum operating pressure rating.

True Union Simplifies Installation

The three-piece design lets you remove the centre section while the union nuts stay on the pipe, so alignment is straightforward. Use only CPVC-compatible solvent cement and allow proper cure time; skipping cure or over-tightening the unions are the most common causes of leaks. The locking tee handle stays in position once set.

Verify Media And Pressure Before Ordering

Confirm that the process media are compatible with CPVC and FPM seals at your operating temperature. The valve is not rated for steam, combustible gas or vacuum service, so those applications must be excluded. Ensure the system design does not exceed the 250 psi pressure limit and that 2 in nominal piping matches your existing lines.

Highlights

  • True union design enables easy inline maintenance
  • CPVC body and ball resist corrosive chemical media
  • Full-port construction provides unrestricted flow path
  • Locking tee handle secures valve position safely
  • Rated for 250 psi maximum operating pressure

Specifications

BrandHAYWARD FLOW CONTROL

Questions about this item

How can I verify the valve is operating correctly after installation?

Cycle the tee handle through a full open and close rotation; the locking feature should engage cleanly and the CPVC ball must move freely without binding at the rated 250 psi.

What components are included and what must be sourced separately?

The three-piece true-union ball valve with CPVC body, CPVC full-port ball, FPM seals, and locking tee handle ships complete; mating pipe, solvent cement, and any required flanges or gaskets are not supplied.

Which valve size and pressure rating should I select for my system?

Choose the 2 in nominal size with the 250 psi maximum operating pressure when your piping matches that diameter and your service pressure does not exceed the rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.