We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC true-union ball valve with tee handle, 2 inch full port

Hayward Flow Control

Hayward Flow Control TBH1200ASTV0000 Ball Valve 2" Full Port

SKU CH-K9C7-5YVVJ

A 2-inch full-port PVC ball valve with tee handle and locking mechanism rated for 250 psi service with corrosive chemicals and water

  • Full-port design ensures unrestricted flow for corrosive media
  • PVC body and ball resist chemical corrosion in water applications
  • True union three-piece construction allows easy inline maintenance
  • Locking tee handle prevents accidental operation during service
  • Rated for 250 psi maximum operating pressure

Industrial Ball Valve

The Hayward Flow Control TBH1200ASTV0000 is a manual two-way ball valve built for corrosive chemicals and water. Its PVC body and full-port ball deliver unrestricted flow in a straight three-piece design. A locking tee handle secures the valve position during operation. The unit is rated for 250 psi maximum operating pressure.

True Union Construction

The three-piece true union layout lets technicians remove the centre section without disturbing the surrounding pipework. This reduces downtime during maintenance or seal replacement. Full port geometry matches the 2 in nominal bore so pressure drop stays minimal across the valve.

Simple Installation

Solvent welding or threading the union ends follows standard PVC practice and requires no special tools. The locking handle prevents accidental actuation once set. Over-tightening the union nuts can stress the PVC body, so hand-tight plus a quarter turn is the usual limit. No steam or combustible gas ratings are provided.

Highlights

  • Full-port design ensures unrestricted flow for corrosive media
  • PVC body and ball resist chemical corrosion in water applications
  • True union three-piece construction allows easy inline maintenance
  • Locking tee handle prevents accidental operation during service
  • Rated for 250 psi maximum operating pressure

Specifications

BrandHAYWARD FLOW CONTROL

Questions about this item

How often should the PVC seats and FPM seals be inspected or replaced when handling corrosive chemicals?

Inspect the PVC seats and FPM seals at least annually when used with corrosive chemicals; replace them if wear, swelling or leakage appears at the union ends or ball interface.

What pressure limit will be reached first during continuous operation at the 250 psi maximum rating?

The 250 psi operating pressure ceiling is the first hard limit; sustained use at or near this value leaves no safety margin for pressure spikes or temperature-related expansion.

Does the PVC body or FPM sealing material degrade noticeably when the valve runs all day under pressure?

PVC and FPM are chemically compatible with the rated media, but prolonged exposure to maximum pressure and elevated temperature can accelerate creep and seal compression set over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.