We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated brass gas regulator model 1036 with dual gauges and rear mounting threads

Harris

Harris KH1036 Specialty Gas Regulator Pipeline High Purity

SKU CH-3XAX-WF73D

High-purity single-stage gas regulator with 0–125 psi delivery range and 3,000 psi maximum inlet pressure

  • TypeGas Regulators
  • Delivers high-purity gas at 0–125 psi for precise laboratory control
  • Single-stage pipeline regulator rated to 3000 psi inlet for reliable supply
  • Stainless-steel diaphragm resists contamination in non-corrosive gas service
  • Chrome-plated brass body with 2.125 in diameter ensures durability
  • Rear panel-mount threads and 1/4 in FNPT connections simplify installation

Harris KH1036 Specialty Gas Regulator

The Harris KH1036 is a single-stage specialty gas regulator built for high-purity, non-corrosive gas service in laboratory environments. It features a chrome-plated brass body with a stainless steel diaphragm and a 2.125 in body diameter. The unit accepts a maximum inlet pressure of 3,000 psi and delivers an adjustable outlet range of 0 to 125 psi. It is designed for pipeline supply with 1/4 in FNPT inlet and outlet connections.

Suits labs needing precise low-pressure delivery

This regulator suits laboratory technicians and engineers who require accurate pressure control for high-purity gases in analytical or research settings. The single-stage design and stainless steel diaphragm provide reliable performance for non-corrosive gas applications. It is not intended for corrosive gas service, high-flow industrial welding, or applications requiring dual-stage pressure stability for critical analytical work.

Panel mount with standard fittings

Installation is straightforward using the rear panel mounting threads and standard 1/4 in FNPT connections for inlet and outlet. The 2 in gauges allow clear pressure monitoring during setup and operation. Common issues include leakage from improperly sealed pipe threads or contamination if the regulator is not dedicated to a single high-purity gas service. Ensure the pipeline supply is clean and within the 3,000 psi maximum inlet rating.

Highlights

  • Delivers high-purity gas at 0–125 psi for precise laboratory control
  • Single-stage pipeline regulator rated to 3000 psi inlet for reliable supply
  • Stainless-steel diaphragm resists contamination in non-corrosive gas service
  • Chrome-plated brass body with 2.125 in diameter ensures durability
  • Rear panel-mount threads and 1/4 in FNPT connections simplify installation

Specifications

BrandHARRIS
TypeGas Regulators

Questions about this item

What inlet pressure must my pipeline supply stay below for the KH1036 regulator to operate safely?

The pipeline supply must not exceed 3,000 psi at the inlet, otherwise the regulator’s maximum inlet pressure rating would be exceeded.

Will the 1/4 in FNPT outlet on this regulator mate directly with the 1/4 in FNPT fittings on my existing lab manifold?

Yes, both the inlet and outlet are 1/4 in FNPT, so the regulator threads straight onto the same fitting size already used on your manifold.

How can I confirm the regulator is delivering pressure within its 0 to 125 psi range once installed?

Watch the 2 in gauge on the regulator body; the needle should settle at your set-point anywhere between 0 and 125 psi during normal operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.