We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass oxygen regulator, chrome finish, single-stage, knob control, CGA 540 inlet

Harris

Harris KH1015 Oxygen Regulator Single Stage 0.965-14 Inlet

SKU CH-72T0-T86ST

Single-stage oxygen regulator with 0.965-14 inlet, 50 psig maximum outlet and CGA 540 connection

  • TypeWelding Supplies
  • Single-stage design delivers consistent 50 psig outlet pressure
  • CGA 540 inlet suits standard oxygen cylinders
  • Brass chrome-plated body resists corrosion in lab use
  • Neoprene diaphragm maintains seal integrity under pressure
  • Male 1/4 in NPT outlet connects common hose fittings

Harris KH1015 Oxygen Regulator

The Harris KH1015 is a single-stage oxygen regulator built for general-purpose laboratory use. It accepts a CGA 540 inlet with a 0.965"-14 male connection and delivers outlet pressure up to 50 psig through a 1/4" male NPT fitting. A chrome-plated brass body and neoprene diaphragm provide durability for specialty gas handling.

Thermals noise and power draw

This mechanical regulator operates without electrical power, so it produces no heat, noise or power draw during use. Pressure control is managed manually via the knob, and the single-stage design reduces outlet pressure directly from the cylinder. No external energy source is required for normal operation.

Included accessories and software

The regulator ships as a complete unit with the inlet and outlet connections integrated into the brass body. No additional accessories, software or calibration tools are mentioned in the specifications. Users must supply compatible tubing and fittings for the 1/4" NPT outlet to suit their specific laboratory setup.

Highlights

  • Single-stage design delivers consistent 50 psig outlet pressure
  • CGA 540 inlet suits standard oxygen cylinders
  • Brass chrome-plated body resists corrosion in lab use
  • Neoprene diaphragm maintains seal integrity under pressure
  • Male 1/4 in NPT outlet connects common hose fittings

Specifications

BrandHARRIS
TypeWelding Supplies

Questions about this item

How do I install the KH1015 regulator on a CGA 540 oxygen cylinder, and what step is often missed?

Connect the 0.965-14 male inlet to the cylinder valve, then tighten with a wrench; the step often missed is using a new fibre washer each time to prevent high-pressure leaks.

What maintenance will the KH1015 need over time?

Replace the neoprene diaphragm and the inlet filter if gas flow becomes erratic or pressure creep appears on the outlet gauge.

What is the first limit reached when the KH1015 runs continuously at high flow?

The single-stage design lets outlet pressure rise as the cylinder empties, so the 50 psig maximum outlet setting is the practical limit before downstream equipment sees pressure creep.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.