We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Harris

Harris 56F318MPOP Brazing Rod 1/16x18 56% Silver

SKU CH-0AJ7-18NKK

Flux-coated 56 % silver brazing rod, 1/16 in diameter and 18 in long, melts at 1,205 °F for strong joints

  • MaterialSafety-Silv-56 Flux Coated
  • TypeFlux Coated
  • 56 % silver alloy for strong, leak-free joints
  • Flux-coated rods eliminate separate flux application
  • 1/16 in diameter suits fine detail work
  • 18 in length gives extended reach
  • Melts at 1 145–1 205 °F for controlled brazing

High-Silver Brazing Rod

The Harris 56F318MPOP brazing rod contains 56 percent silver and meets AWS BAg-7 classification. It is built for technicians who need a strong, ductile joint on copper, brass or steel assemblies.

Flux-Coated Convenience

Each rod measures 1/16 inch in diameter and 18 inches long with a Safety-Silv 56 flux coating already applied. The coating eliminates separate flux handling and promotes clean flow between 1,145 and 1,205 degrees Fahrenheit.

Upgrade from Lower-Silver Alloys

The high silver content reduces brazing temperature compared to 40 or 45 percent alloys, lowering distortion risk on thin-wall tubing. It is not suited for aluminium, stainless steel or applications requiring a cadmium-bearing filler.

Highlights

  • 56 % silver alloy for strong, leak-free joints
  • Flux-coated rods eliminate separate flux application
  • 1/16 in diameter suits fine detail work
  • 18 in length gives extended reach
  • Melts at 1 145–1 205 °F for controlled brazing

Specifications

BrandHarris
MaterialSafety-Silv-56 Flux Coated
TypeFlux Coated

Questions about this item

What AWS classification and silver content does the 56F318MPOP rod carry?

The rod is classified AWS BAg-7 and contains 56 percent silver.

What overall diameter and length must the torch or holder accommodate?

The rod measures 1/16 inch in diameter and 18 inches in length.

How is the flux applied and what temperature range should be used?

The rod is flux-coated; heat the joint to the 1145–1205 °F working range so the coating flows and protects the braze.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.