We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver brazing rods 3/32 inch diameter 18 inch length bare finish

Harris

Harris 45518LMPOP Brazing Rod 3/32x18 Safety-Silv-45

SKU CH-PZ1Y-5523C

A 45 % silver brazing rod, 3/32 in diameter and 18 in long, melting between 1,225 °F and 1,370 °F

  • MaterialSafety-Silv-45
  • TypeWelding Supplies
  • High-silver alloy with 45 percent silver content for strong joints
  • Melting range 1225 to 1370 degrees Fahrenheit suits precise brazing work
  • AWS BAg-5 classification confirms industry-standard composition and performance
  • 3/32 inch diameter by 18 inch length fits common torch setups
  • Bare rod finish allows direct flux application for clean flow

Harris Safety-Silv-45 Brazing Rod

This Harris brazing rod uses a Safety-Silv-45 alloy containing 45 percent silver for high-strength joints. Each rod measures 3/32 inch in diameter and 18 inches long. The bare rods come in a pack of three for workshop use.

Melting range 1225 to 1370 degrees F

The alloy reaches solidus at 1225 degrees F and becomes fully liquid at 1370 degrees F. This melting range allows controlled flow during sustained heating without overheating the base metal. Operators can maintain a consistent temperature window for repeatable results.

Replaces lower-silver brazing alloys

Upgrading from lower-silver alloys improves joint strength and ductility where vibration or thermal cycling occur. The higher silver content reduces the risk of brittle fractures in demanding service conditions. The jump is worth it when joint reliability outweighs material cost.

Highlights

  • High-silver alloy with 45 percent silver content for strong joints
  • Melting range 1225 to 1370 degrees Fahrenheit suits precise brazing work
  • AWS BAg-5 classification confirms industry-standard composition and performance
  • 3/32 inch diameter by 18 inch length fits common torch setups
  • Bare rod finish allows direct flux application for clean flow

Specifications

BrandHarris
MaterialSafety-Silv-45
TypeWelding Supplies

Questions about this item

How much heat does the 3/32 in rod generate during a full-day brazing job?

The Safety-Silv-45 rod melts between 1,225 °F solidus and 1,370 °F liquidus, so the torch — not the rod — determines heat output and runtime temperature.

What torch setup must I already own to use the 18 in Safety-Silv-45 rods?

You need an oxy-fuel torch capable of reaching at least 1,370 °F and a tip suited for 3/32 in diameter filler metal.

Will the AWS BAg-5 alloy flow properly on the older copper fittings I plan to keep?

Yes, the 45 % silver alloy is designed for copper and copper-alloy joints, provided the surfaces are clean and fluxed before heating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.