We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver bent conical soldering tip with fine pointed end

Hakko

Hakko T15-JS02 Soldering Tip Bent Conical 0.4mm 1.6mm 30°

SKU CH-5F4F-3BE6Y

Bent conical tip with 0.4 mm width and 1.6 mm length fits T15-series handpieces for precision soldering

  • TypeChisel
  • Bent conical shape reaches tight joints with 0.4 mm tip width
  • 6 mm tip length suits fine-pitch components and small pads
  • 30 degree angle improves visibility and access on dense boards
  • Works with FM-2027 and FM-2028 handpieces on multiple Hakko stations
  • Withstands 840 °F operating temperature for demanding soldering tasks

Hakko T15-JS02 Bent Conical Tip

The Hakko T15-JS02 is a new soldering tip from the T15 series with a bent conical shape. Its tip width is 0.4 mm, tip length is 1.6 mm and the angle measures 30 degrees. The outside diameter is 0.4 mm and the overall length is 7.9 mm. It is built from composite material for soldering applications.

Suits FM-2027 and FM-2028 handpieces

This tip fits Hakko FM-2027 and FM-2028 handpieces and works with FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950 and FX-951 stations. Buyers who need a different tip geometry such as a standard chisel or straight conical profile should look at another model. Users with stations or handpieces outside the listed compatible models cannot use this tip.

Maximum temperature 840 degrees F

The single specification that decides fit is the maximum operating temperature of 840 degrees F. Your station must support this temperature range and the T15 series interface. If your equipment runs at a lower limit or uses a different tip series, this tip will not function correctly.

Highlights

  • Bent conical shape reaches tight joints with 0.4 mm tip width
  • 6 mm tip length suits fine-pitch components and small pads
  • 30 degree angle improves visibility and access on dense boards
  • Works with FM-2027 and FM-2028 handpieces on multiple Hakko stations
  • Withstands 840 °F operating temperature for demanding soldering tasks

Specifications

BrandHakko
TypeChisel

Questions about this item

How hot can the T15-JS02 tip get before it hits its limit?

The maximum operating temperature is 840 degrees Fahrenheit, so sustained work above that point will exceed the tip's rated limit.

Does the tip run hot enough to need extra cooling during long sessions?

The tip itself has no active cooling; heat management depends on the station you pair it with and the duration of each joint.

Which Hakko stations and handpieces accept this tip?

It fits FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950 and FX-951 stations with FM-2027 or FM-2028 handpieces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.