Hakko
Hakko T15-JD14 Bent Chisel Soldering Tip 1.4mm
Bent chisel soldering tip with 1.4 mm width and 30-degree angle for T15-series stations
- TypeTraffic & Parking Lot
- Size/Dimensions1.4mm x 6mm x 7mm
- MaterialHAWA
- Precise joints with 1.4 mm bent chisel tip
- Reaches tight spots using 30 degree angled profile
- Works at 840 degrees F for demanding soldering tasks
- Fits FM-2027 and FM-2028 handpieces on multiple stations
- Composite HAWA material resists wear for long tip life
T15 Bent Chisel Tip 1.4 mm
The Hakko T15-JD14 is a bent chisel soldering tip with a 1.4 mm width and 6 mm length. It fits Hakko T15 series handpieces such as the FM-2027 and FM-2028. The tip operates at up to 840 °F and suits general soldering tasks requiring a narrow profile.
T15 series station compatibility
This tip works with Hakko stations FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950 and FX-951. It will not function with stations outside the T15 series or with handpieces that use a different tip interface. Buyers needing a different tip geometry or a non-Hakko station cannot use this item.
Simple push-fit installation
The tip slides into the compatible handpiece and seats with a light push. A loose fit usually means the handpiece sleeve is worn or the wrong series is fitted. The 30 degree bend can limit access on dense boards, so verify clearance before starting work.
Highlights
- Precise joints with 1.4 mm bent chisel tip
- Reaches tight spots using 30 degree angled profile
- Works at 840 degrees F for demanding soldering tasks
- Fits FM-2027 and FM-2028 handpieces on multiple stations
- Composite HAWA material resists wear for long tip life
Specifications
| Brand | Hakko |
|---|---|
| Type | Traffic & Parking Lot |
| Size/Dimensions | 1.4mm x 6mm x 7mm |
| Material | HAWA |
Questions about this item
Which tip width should I pick for fine-pitch work?
The 1.4 mm bent chisel is the only width offered in this T15-JD14 model, suited for small pads and drag soldering.
What does the 840 °F rating mean when I am soldering?
It is the maximum temperature the tip can reach on a compatible station; actual joint temperature will be lower depending on thermal mass and dwell time.
Which stations and handpieces does the T15 series work with?
Compatible stations include FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950, FX-951; handpieces FM-2027 and FM-2028.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00209128BTC
In stock