We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hakko T15-C1 bevel soldering tip, 1mm x 12mm, silver metal finish

Hakko

Hakko T15-C1 Bevel Soldering Tip 1mm x 12mm

SKU CH-AXF7-FDSH7

Bevel soldering tip with a 1 mm width and 12 mm length for Hakko FM-2027 and FM-2028 handpieces

  • TypeChisel
  • Size/Dimensions1mm x 12mm
  • MaterialHAWA
  • Bevel profile reaches tight joints
  • 1 mm width suits fine-pitch work
  • 12 mm length gives extra reach
  • 60 ° angle improves heat transfer
  • Composite material withstands 840 °F operation

Hakko T15-C1 Bevel Soldering Tip

The Hakko T15-C1 is a bevel-type soldering tip measuring 1mm in width and 12mm in length. It is designed for precision soldering tasks using the T15 tip series. The tip operates at a maximum temperature of 840 degrees Fahrenheit and is constructed from HAWA composite material. This component is intended for electronics assembly and repair work.

Suits T15 station owners needing a fine bevel

This tip fits users with Hakko stations such as the FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950 or FX-951 and handpieces FM-2027 or FM-2028. It is not for operators using other tip series or non-Hakko handpieces. Buyers who need a different tip geometry or a larger contact area should look at something else.

1mm x 12mm bevel with 60-degree angle

The defining specification is the 1mm by 12mm bevel profile with a 60-degree angle. This geometry determines the heat transfer area and access for fine-pitch work. Confirm that your handpiece accepts T15 series tips before purchasing.

Highlights

  • Bevel profile reaches tight joints
  • 1 mm width suits fine-pitch work
  • 12 mm length gives extra reach
  • 60 ° angle improves heat transfer
  • Composite material withstands 840 °F operation

Specifications

BrandHakko
TypeChisel
Size/Dimensions1mm x 12mm
MaterialHAWA

Questions about this item

How can I confirm the T15-C1 tip is heating correctly after installing it on my FM-2027 handpiece?

The station display should reach the set temperature and hold it steadily; a properly seated tip will melt solder within a few seconds at 840 °F maximum operating temperature.

What comes with the T15-C1 bevel tip and do I need any extra parts to use it?

The package contains the single T15-C1 tip only; you must already own a compatible Hakko handpiece such as the FM-2027 or FM-2028 and a supported station like the FM-202, FM-203, FM-204, FM-206, FP-101, FP-102, FX-950 or FX-951.

Which T15 series tip should I choose for drag-soldering fine-pitch ICs?

The T15-C1 bevel tip with a 1 mm width, 12 mm length and 60-degree angle is designed for drag-soldering and fine-pitch work, while other T15 shapes such as chisel or conical serve different joint geometries.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.