We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hakko FR-410 desoldering station with digital display and gun-style handpiece

Hakko

Hakko FR410-53 190W Desoldering Station

SKU CH-T4Q2-XWJ73

190 W single-channel ESD-safe desoldering station with digital display, 620–850 °F range and N61 tip compatibility

  • TypeSolders & Supplies
  • ESD-safe design protects sensitive components during desoldering
  • 190 W power delivers rapid heat-up for efficient workflow
  • Digital display shows precise temperature between 620 °F and 850 °F
  • Single-channel station with FR-4104 handpiece and N61 tip series
  • Round 1 mm tip enables focused desoldering on fine joints

190 W ESD-safe desoldering station

The Hakko FR410-53 is a single-channel desoldering station rated at 190 W for professional rework benches. It is built for technicians who need reliable through-hole component removal with static-safe operation.

Thermals, noise and power in normal use

The station draws 190 W from the mains and heats the handpiece between 620 °F and 850 °F for consistent molten-solder extraction. Digital temperature control maintains the set point without overshoot, and the ESD-safe chassis prevents static discharge during sensitive board work.

Bundled handpiece and tip compatibility

The package includes the FR4104-81 handpiece designed for the N61 tip series with a 1 mm round tip fitted. This combination lets operators start desoldering immediately while the digital display confirms the active temperature at a glance.

Highlights

  • ESD-safe design protects sensitive components during desoldering
  • 190 W power delivers rapid heat-up for efficient workflow
  • Digital display shows precise temperature between 620 °F and 850 °F
  • Single-channel station with FR-4104 handpiece and N61 tip series
  • Round 1 mm tip enables focused desoldering on fine joints

Specifications

BrandHAKKO
TypeSolders & Supplies

Questions about this item

How do I install the FR4104-81 handpiece and what step do people miss?

Connect the FR4104-81 handpiece to the single-channel station, fit an N61 series tip of 1 mm width, power on and set the digital display between 620 °F and 850 °F; the step often missed is seating the tip fully so the vacuum seal holds.

What maintenance will the desoldering station need later?

Replace N61 series tips when the 1 mm round aperture erodes, clean the internal filter and nozzle of the FR4104-81 handpiece after each session, and check the vacuum line for blockages that reduce suction.

What limit appears first during long desoldering sessions?

The 190 W station power caps sustained heat output, so the tip temperature can drop below the 620 °F minimum if heavy joints are worked continuously without pauses.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.