We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Greenlee 7212SP-1P Speed Punch hand tool, 1 in, 10 ga, round punch, silver metal finish

Greenlee

Greenlee 7212SP-1P Speed Punch hand tool 1 in 10 ga

SKU CH-0A62-J1RNJ MPN 7212SP-1P

Punches round holes in metal up to 10 ga with a split-slug design that falls free from the die

  • TypeHand Held Punches
  • Punches 10-gauge steel cleanly with a 1 23/64 in nominal hole size
  • Splitting slug falls free from die and stud for faster knockout removal
  • Works with battery-hydraulic or manual-hydraulic drivers for flexible job-site use
  • Cuts aluminum, brass, copper, fiberglass, mild steel and plastic up to 10 gauge
  • Round punch delivers exact 1 9/25 in diameter holes without a draw stud

Greenlee Speed Punch 1 in 10 ga

The Greenlee 7212SP-1P Speed Punch is a hand-held knockout tool designed for electrical and metal fabrication work. It creates clean, round holes in sheet materials up to 10 gauge thickness. Compatible with battery-hydraulic and manual-hydraulic drivers, this single-piece punch suits professionals installing conduit or cable entries.

Electricians and panel builders needing 1 23/64

This punch serves installers working with aluminum, brass, copper, fiberglass, mild steel, and plastic sheets at 10 gauge capacity. The split-slug design ejects waste automatically from the die and stud. It is not suited for workers requiring larger diameters, different shapes, or capacity beyond 10 gauge steel and aluminum.

Nominal hole size 1 23/64 in decides fit

The exact hole diameter of 1 9/25 in matches standard conduit knockout requirements for this trade size. Verify that your hydraulic driver accepts Speed Punch series components before purchase. This specification alone determines whether the tool matches your knockout layout.

Highlights

  • Punches 10-gauge steel cleanly with a 1 23/64 in nominal hole size
  • Splitting slug falls free from die and stud for faster knockout removal
  • Works with battery-hydraulic or manual-hydraulic drivers for flexible job-site use
  • Cuts aluminum, brass, copper, fiberglass, mild steel and plastic up to 10 gauge
  • Round punch delivers exact 1 9/25 in diameter holes without a draw stud

Specifications

BrandGreenlee
Model7212SP-1P
TypeHand Held Punches

Questions about this item

Does the Greenlee 7212SP-1P Speed Punch include a draw stud in the box?

The draw stud is not included with this single punch; it must be purchased separately to operate the tool.

Which sheet-metal thicknesses does the 1 in 10 ga Speed Punch handle?

It cuts a 1 23/64 in hole through mild steel, aluminum, brass, copper, fiberglass and plastic up to 10 ga thickness.

What happens to the slug after punching a 1 9/25 in hole with this tool?

The slug splits in half and falls free from the die and stud, clearing the work area automatically.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.