We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Greenlee 06727 knockout punch, round steel body, 0.492 inch hole size, 16 gauge capacity

Greenlee

Greenlee 06727 Knockout Punch 0.492 in 16 Ga

SKU CH-PQQV-KH179 MPN 06727

Creates 0.492 inch holes in 16 gauge mild steel, aluminium, fiberglass or plastic using manual, hydraulic or battery drivers

  • TypeHand Held Punches
  • Punches 16-gauge mild steel with a 0.492 in hole size
  • 123/250 in nominal diameter for precise conduit openings
  • Slug falls free to speed up repetitive knockouts
  • Centering marks align holes accurately before punching
  • Works with manual wrench, hydraulic or battery knockout drivers

Knockout Punch 0.492 in 16 Ga

Greenlee 06727 is a hand-held knockout punch designed to cut standard round holes with a nominal size of 0.492 in (123/250 in) in materials up to 16 gauge mild steel. It suits electricians and panel builders who need a single-size tool for conduit entry or component mounting in mild steel, aluminum, fiberglass, or plastic enclosures. The slug falls free and centering marks aid hole alignment.

Suited for single-hole jobs, not for multi-size work

This punch serves technicians who repeatedly need the same 0.492 in hole size and can drive the tool with a manual wrench, hydraulic driver, or battery-operated knockout driver. It is not for buyers who require a kit with interchangeable dies for multiple diameters, nor for those who need to punch material thicker than 16 gauge mild steel.

Nominal hole size 0.492 in (123/250 in)

The decisive specification is the fixed hole diameter of 0.492 in, expressed as 123/250 in, which matches specific conduit or connector standards. If the project calls for a different hole size, this single-die punch cannot be adapted and a different tool or die set must be chosen.

Highlights

  • Punches 16-gauge mild steel with a 0.492 in hole size
  • 123/250 in nominal diameter for precise conduit openings
  • Slug falls free to speed up repetitive knockouts
  • Centering marks align holes accurately before punching
  • Works with manual wrench, hydraulic or battery knockout drivers

Specifications

BrandGreenlee
Model06727
TypeHand Held Punches

Questions about this item

Does the Greenlee 06727 knockout punch come with a wrench or driver, or must I supply my own?

The punch is designed for use with a manual wrench, hydraulic driver, or battery-operated knockout driver, none of which are included in the box.

The spec lists hole size as 123/250 in and 0.492 in — are these the same punch or different versions?

They are the same punch; 123/250 in is the fractional equivalent of the nominal 0.492 in hole size.

With a 16-gauge mild-steel rating, what thickness of material can this punch actually cut in a workshop?

It is rated to punch through mild steel up to 16 gauge, as well as aluminium, fibreglass and plastic of comparable thickness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.