We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Tools C68 pinch bar, 30 inch nickel plated steel pry bar

Gray Tools

Gray Tools C68 Pinch Bar 15/16" Cut 7/8" Shank 30" Nickel

SKU CH-C8K4-R9Y4W

Forged alloy steel pinch bar with 15/16 inch cut, 7/8 inch shank and 30 inch length for prying and alignment tasks

  • Forged premium alloy steel delivers maximum durability
  • Nickel plate finish resists corrosion for long service life
  • Speciality heat treatment adds strength under heavy use
  • 30 inch length provides extended leverage and reach
  • 15/16 inch cut width suits large fastener heads

Pinch Bar 15/16 Inch Cut

The Gray Tools C68 is a forged alloy steel pinch bar designed for prying and alignment tasks. Its 15/16 inch cutting width and 30 inch overall length provide substantial leverage for electricians and mechanics. A corrosion resistant nickel plate finish protects the tool surface during storage and use.

Heat Treated Durability

Speciality heat treatment maximises the bar's structural durability under high stress. The solid steel construction transmits force directly without flex or vibration. No moving parts or power source means silent operation and zero energy draw in every working scenario.

7/8 Inch Shank Fit

The 7/8 inch shank dimension suits standard tool storage and hand grip requirements. Its 30 inch length clears obstacles while reaching deep fasteners or alignment points. Buyers needing a smaller cutting width or a shorter reach will need a different bar.

Highlights

  • Forged premium alloy steel delivers maximum durability
  • Nickel plate finish resists corrosion for long service life
  • Speciality heat treatment adds strength under heavy use
  • 30 inch length provides extended leverage and reach
  • 15/16 inch cut width suits large fastener heads

Specifications

BrandGRAY TOOLS

Questions about this item

How do you position the 15/16 inch cut edge when starting a pry?

Align the full 15/16 inch blade face against the workpiece, then apply steady leverage through the 30 inch length — do not strike the shank with a hammer, as the forged alloy steel is heat-treated for controlled bending, not impact.

What upkeep does the nickel plate finish need over time?

Wipe the 7/8 inch shank and blade clean after each use; the corrosion-resistant nickel plate requires no lubrication, but inspect for chips if the bar contacts hardened fasteners.

At what point does the 7/8 inch shank begin to flex under a continuous load?

The specialty heat-treated alloy steel is designed to yield visibly before permanent deformation — when the 30 inch bar shows a slight bow, back off the force to avoid exceeding the material’s elastic limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.