We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green metal spray tip with threaded base

Graco

Graco LP515 Spray Tip 0.015 in 4050 psi

SKU CH-0TEQ-N7WD0

Airless spray tip with 0.015 in orifice, 10 to 12 in pattern and 4050 psi rating

  • TypeBlow Guns, Air Guns & Spray Guns
  • Precise 0.015 in tip size for fine finish control
  • 10 to 12 in spray pattern covers broad surfaces quickly
  • 4050 psi maximum working pressure handles demanding coatings
  • Reversible tip clears clogs without tool changes
  • OneSeal included for leak-free installation

Spray Tip 0.015 Inch

The Graco LP515 spray tip is built for professional airless spray applications requiring a fine finish. It suits contractors and painters who need precise material control on detailed surfaces.

Pattern Width 10 to 12 Inches

The tip produces a 10 to 12 inch fan pattern at the 0.015 inch orifice size. This capacity handles light coatings and detail work comfortably but runs out on heavy-bodied materials that demand a larger opening.

Maximum Pressure 4050 PSI

The component is rated for 4050 psi maximum working pressure within a standard 7/8 inch thread interface. Operating beyond this limit risks seal failure and the reversible SmartTip mechanism will not clear blockages if pressure exceeds the design threshold.

Highlights

  • Precise 0.015 in tip size for fine finish control
  • 10 to 12 in spray pattern covers broad surfaces quickly
  • 4050 psi maximum working pressure handles demanding coatings
  • Reversible tip clears clogs without tool changes
  • OneSeal included for leak-free installation

Specifications

TypeBlow Guns, Air Guns & Spray Guns
BrandGRACO

Questions about this item

Will the 0.015 in tip and 10 in to 12 in pattern work with my existing Graco airless gun that uses a 7/8 in thread?

Yes, the tip has a 7/8 in thread and is made for Graco gun 246215, so it fits directly on that gun and gives a 10 in to 12 in fan.

How can I confirm the tip is performing correctly once installed?

Spray at up to 4050 psi and check for an even 10 in to 12 in fan with no tails; if the pattern stays uniform the tip is working as intended.

Does the package include the OneSeal tip seal or do I need to buy it separately?

The box includes one OneSeal tip seal, so no separate seal purchase is required for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.