We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12-inch 10-blade push-pull cooling fan with mounting kit

GESEXI MK0038 12 Inch 12V 80W 800 CFM 10 Blade Push Pull Cooling Fan Black

SKU CH-6RKA-P9QM9

A slim 12-inch reversible electric radiator fan delivers 800 CFM airflow from a 12V 80W motor with ten blades and a push-pull mounting kit

  • Slim 2.5 in profile clears tight engine bays
  • 800 CFM airflow at 2000 RPM cools efficiently
  • Reversible 10-blade design switches push or pull mode
  • 12 V 80 W motor powers universal fitment
  • Mounting kit included for quick bolt-on install

Universal 12-inch slim radiator fan

The GESEXI MK0038 is a 12 V, 80 W electric cooling fan built for tight engine bays and auxiliary heat exchangers. Its 10-blade, push-pull reversible design suits radiators, oil coolers, transmission coolers and condensers on a wide range of vehicles and stationary equipment.

Thermals noise and power draw

Rated at 80 W on a 12 V supply, the motor spins to 2000 RPM ±10 % and moves 800 CFM through a slim 2.500 in profile. The reversible blade kit lets the installer choose puller or pusher airflow to match the heat-exchanger layout without changing the electrical load.

Mounting kit and reversible blade change

The box supplies one fan assembly, four mounting rods, four clips, four foam pads, four feet and four springs for bolt-on installation. Switching between push and pull modes only requires reversing the power leads and flipping the blade; the maker recommends thread-locking adhesive on the securing nut to prevent loosening.

Highlights

  • Slim 2.5 in profile clears tight engine bays
  • 800 CFM airflow at 2000 RPM cools efficiently
  • Reversible 10-blade design switches push or pull mode
  • 12 V 80 W motor powers universal fitment
  • Mounting kit included for quick bolt-on install

Specifications

BrandGESEXI
Part NumberMK0038

Questions about this item

How do I install the MK0038 fan and switch it between push and pull modes?

Mount the fan using the four included rods, clips, foam pads, feet and springs; to change from pusher to puller, reverse the power leads and flip the 10-blade impeller over, then apply thread-locking adhesive to the retaining nut so it cannot loosen during rotation.

What maintenance will the MK0038 require over its service life?

Periodically check that the mounting hardware remains tight and that the 10 blades are free of debris; the reversible 12 V 80 W motor is sealed, so no lubrication is needed, but verify the nut secured with thread-locking adhesive has not backed off after the first few heat cycles.

At what airflow does the MK0038 reach its thermal limit during continuous operation?

The fan is rated at 800 CFM at 2000 RPM; sustained running at that output is the design limit, so monitor engine or equipment temperature — if it rises above normal, the 2.500-inch-thick slim housing cannot move more air without a larger-diameter or higher-wattage unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.