Genie Garage Door Opener Remote 315/390MHz 2-pack
Two remotes operate Genie IntelliCode and Overhead CodeDodger openers from 1995 onward using 315/390MHz signals up to 164 feet
- Dimensions14.33in W x 12.83in H x 9.06in D
- Compliancehas_fcc_id, not_applicable, 2ALGN-G3T-R
- PowerAlkaline
- Controls up to three doors with one remote
- Works with Genie IntelliCode and Overhead CodeDodger openers from 1995 onward
- Operates on 315/390MHz dual frequency
- Includes two remotes with sunshade clips for vehicle mounting
- 164-foot range lets you open the door before you arrive
Two-pack remote for Genie openers
This two-pack supplies Genie IntelliCode and Overhead CodeDodger compatible remotes operating on 315/390MHz frequencies. Each unit controls up to three door or gate operators from a single handset. The remotes suit openers manufactured from 1995 onward and ship new with batteries included.
Bundled clips and manuals
Two sunshade clips and two printed manuals arrive in the box so both remotes can be mounted in vehicles immediately. The clips attach to a car visor for quick access while driving and the manuals walk through programming in minutes. No additional accessories or software are required for basic operation.
Frequency and brand limits
The remotes operate only on 315/390MHz and lack DIP-switch configuration so they cannot pair with Craftsman, LiftMaster, Chamberlain, Linear, Raynor, Marantz, Precision or Legacy openers. Effective range reaches 164 feet under clear conditions. Buyers needing multi-brand compatibility or DIP-switch programming should look elsewhere.
Highlights
- Controls up to three doors with one remote
- Works with Genie IntelliCode and Overhead CodeDodger openers from 1995 onward
- Operates on 315/390MHz dual frequency
- Includes two remotes with sunshade clips for vehicle mounting
- 164-foot range lets you open the door before you arrive
Specifications
| Model | Garage Door Opener Remote G3T-R |
|---|---|
| Part Number | G3T-BX G3T-R G3T-A |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Compliance | has_fcc_id, not_applicable, 2ALGN-G3T-R |
| Power | Alkaline |
Questions about this item
What batteries will the G3T-R remotes need replaced over time?
Each remote runs on standard alkaline cells; swap them out when range drops below the rated 164 feet.
What stops the G3T-R from working with older openers?
It lacks DIP-switch programming, so it only pairs with Genie IntelliCode and Overhead CodeDodger units made from 1995 onward.
How much heat or noise do the remotes produce during daily use?
They are passive transmitters — no motor, fan or circuitry that generates noticeable heat or sound while operating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



