We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
GE THQC two-pole breaker, grey plastic body, toggle switch, lug terminals

GE

GE THQC2150WL Circuit Breaker 50A 2 Pole 120/240V AC

SKU CH-6DKQ-NBKGD

A two-pole miniature circuit breaker rated 50 A at 120/240 V AC with a 10 kA interrupting capacity, DIN-rail or surface mount, and lug terminals for 8 to 3 AWG wire

  • 50 A rating protects 120/240 V circuits
  • 10 kA interrupting capacity clears faults safely
  • Two-pole design serves single-phase panelboards
  • Lug terminals accept 8 to 3 AWG conductors
  • Compact 3.3 × 2 × 2.4 in frame fits GE load centres

GE THQC 50 A Two-Pole Breaker

This GE THQC miniature circuit breaker delivers 50 A of over-current protection for single-phase 120/240 V AC panels. It mounts on surface or DIN rail and uses a toggle actuator for manual reset. The 100 A frame size fits GE panelboards that accept THQC series devices. Lug terminals accept conductors from 8 AWG to 3 AWG.

10 kA Interrupting Limit

The breaker carries a UL-listed AIR rating of 10 kA at 120/240 V AC, meaning it can safely interrupt fault currents up to that level. It has no DC voltage rating, so it must not be used on DC circuits. The standard trip curve protects branch circuits without selective coordination. Installers must verify the available fault current at the panel does not exceed the 10 kA rating.

50 A Continuous Capacity

At 50 A the device handles typical residential and light-commercial branch loads such as ranges, dryers or sub-panel feeds. The two-pole construction provides common-trip protection for both legs of a 240 V circuit. Loads exceeding 50 A or fault currents above 10 kA require a larger frame or higher AIR rating. The 3.3 in length, 2 in width and 2.4 in depth determine the panel space needed.

Highlights

  • 50 A rating protects 120/240 V circuits
  • 10 kA interrupting capacity clears faults safely
  • Two-pole design serves single-phase panelboards
  • Lug terminals accept 8 to 3 AWG conductors
  • Compact 3.3 × 2 × 2.4 in frame fits GE load centres

Specifications

BrandGE

Questions about this item

Which THQC breaker rating should I choose for a 50 A load?

Select the 50 A, 2-pole THQC model when the circuit is rated for 50 A at 120/240 V AC.

What does the 10 kA interrupting rating mean when the breaker is installed?

It means the breaker can safely interrupt up to 10 kA of fault current at 120/240 V AC in a GE panelboard.

What mounting standard does the THQC series use and what panelboards does it fit?

The breaker mounts on a surface or DIN rail and is listed for use with GE panelboards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.