We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
GE TGK42 ground kit metal bar with 42 terminals 14-4 AWG 225A

GE

GE TGK42 Ground Kit Surface/Flush 225A 42 Terminals 14-4 AWG

SKU CH-QEVM-RRPZE

Ground kit provides 42 terminals for 14 to 4 AWG conductors at 225 A in surface or flush mounting

  • Ground kit rated 225 A for high-capacity circuits
  • 42 terminals allow extensive grounding connections
  • Accepts wire sizes from 14 AWG to 4 AWG
  • Compatible with PowerMark Gold and Plus load centres
  • Includes two mounting screws for surface or flush installation

GE TGK42 Ground Kit 225A 42 Terminals

This GE ground kit provides a common grounding point for up to forty-two conductors inside compatible load centres. It accepts copper or aluminium wires ranging from 14 AWG to 4 AWG and carries a 225 A rating. The kit includes two mounting screws for surface or flush installation.

Installers fitting PowerMark Gold

Electricians working with those specific load-centre lines will find the terminal count and ampacity match the enclosure requirements. Builders using other load-centre brands or panels that demand a different terminal quantity or amperage should verify compatibility before purchase.

42 terminals for 14 to 4 AWG conductors

The forty-two terminals determine how many grounding conductors can be landed in a single block. If the wiring plan calls for more circuits than the kit provides terminals, an additional ground bar will be required.

Highlights

  • Ground kit rated 225 A for high-capacity circuits
  • 42 terminals allow extensive grounding connections
  • Accepts wire sizes from 14 AWG to 4 AWG
  • Compatible with PowerMark Gold and Plus load centres
  • Includes two mounting screws for surface or flush installation

Specifications

BrandGE

Questions about this item

Will the 42 terminals ever need retightening after thermal cycling?

The 42 terminals accept 14 to 4 AWG conductors; periodic inspection and retorquing to GE specifications is recommended after the first heating cycles.

What limits continuous current on the 225 A ground kit?

The kit is rated 225 A; sustained loads at that level are limited by the 4 AWG maximum conductor size and the load-center bus rating.

Does the ground kit generate noticeable heat when the load center runs at 225 A all day?

At 225 A the copper bus and 4 AWG conductors will warm, but the kit has no active cooling; ensure the enclosure ventilation meets code for continuous duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.