We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey moulded-case breaker, single pole, bolt-on terminals, 5.25 by 1 by 3.06 inches

GE

GE TEY130 Circuit Breaker 30A 1 Pole 277/480V AC

SKU CH-724Z-4CWF2

A 30 A single-pole molded-case breaker rated 277/480 V AC with 14 kA interrupting capacity and thermal-magnetic trip for GE AE lighting panels

  • 30 A single-pole protection for 277/480 V AC circuits
  • 14 kA interrupting rating at 277 V AC handles fault currents
  • Thermal-magnetic trip with fixed 575 A instantaneous setting
  • Bolt-on mounting fits GE AE lighting panels directly
  • 125 V DC rating adds versatility for mixed-voltage panels

GE TEY130 Circuit Breaker

The GE TEY130 is a molded case circuit breaker rated at 30 amps for single-phase AC systems up to 277/480 volts. It uses a thermal-magnetic trip mechanism with a fixed instantaneous setting and a high amp trip point of 575 amps. This bolt-on panelboard device fits GE AE lighting panels and accepts lug terminal connections.

14 kA Interrupting Rating at 277V

The maximum AIR rating of 14 kA at 277 volts AC determines whether this breaker can safely clear a fault on your circuit. It also carries a 125 volt DC rating for limited direct current applications. Verify that your panel's available fault current does not exceed this interrupting capacity before installation.

Bolt-On Mounting for TEY Frame Panels

The unit mounts directly onto compatible GE panelboards using the bolt-on method and occupies a standard single-pole space within the 125 amp TEY frame size. Its compact dimensions of 5.25 inches high by 1 inch wide by 3.06 inches deep allow it to fit in tight panel arrangements while freeing adjacent slots for additional branch circuits.

Highlights

  • 30 A single-pole protection for 277/480 V AC circuits
  • 14 kA interrupting rating at 277 V AC handles fault currents
  • Thermal-magnetic trip with fixed 575 A instantaneous setting
  • Bolt-on mounting fits GE AE lighting panels directly
  • 125 V DC rating adds versatility for mixed-voltage panels

Specifications

BrandGE

Questions about this item

What does the 30 A rating mean when this breaker is installed in a panel?

The 30 A rating means the breaker will carry up to 30 A continuously and trip on sustained overloads above that level, protecting the downstream wiring in a GE AE lighting panel.

How does the 277/480 V AC rating limit where this single-pole breaker can be used?

The 277/480 V AC rating allows use on 277 V phase-to-neutral or 480 V phase-to-phase circuits, with a 14 kA interrupting rating at 277 V AC and a 125 V DC rating for DC applications.

What panel space and mounting does the 1-pole, bolt-on frame require?

The breaker occupies a 1-inch wide, 5.25-inch high, 3.06-inch deep slot and bolts directly onto a GE AE panelboard bus using the supplied lug terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.