We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber V-belt with cogged inner surface, 13 mm wide, 10 mm thick, 2120 mm outer length

Gates

Gates XPA2120 V-Belt 2120mm

SKU CH-443M-JSX6N

Metric XPA-section V-belt with 2120 mm outside length, 13 mm top width and 10 mm thickness

  • Metric XPA section fits standard 13 mm pulleys
  • 2120 mm outside length matches spec requirements
  • Cogged raw-edge design reduces bending stress
  • Polyester tensile cords deliver high strength
  • Operates from -30 °F to 140 °F

Gates XPA2120 V-Belt Overview

This Gates XPA2120 is a metric V-belt built for lifting, pulling and conveying tasks. It suits maintenance engineers and plant operators who need a direct replacement for worn drive belts on industrial machinery. The raw-edge, cogged construction fits standard XPA pulleys and installs without special tools. It is a new component ready for immediate service.

Critical Specification: 2120 mm Outside Length

The single figure that decides fitment is the 2120 mm outside length. This dimension must match the original belt or the pulley centre distance exactly. A belt that is even slightly longer will slip under load; one that is shorter will not seat in the grooves. Verify the length before ordering to avoid costly downtime.

Capacity and Operating Limits

The belt transmits power through a 13 mm top width and 10 mm thickness using polyester tensile cords in a fiber-loaded elastomeric compound. It operates reliably from -30 to 140 degrees F and resists oil, heat, ozone and flame. It is not suited for drives that require multi-rib engagement or lengths outside the single 2120 mm size.

Highlights

  • Metric XPA section fits standard 13 mm pulleys
  • 2120 mm outside length matches spec requirements
  • Cogged raw-edge design reduces bending stress
  • Polyester tensile cords deliver high strength
  • Operates from -30 °F to 140 °F

Specifications

BrandGATES

Questions about this item

How does the 2120 mm outside length affect the drive ratio on my machine?

The 2120 mm outside length sets the centre distance between pulleys and determines the speed ratio when paired with the driven pulley diameter.

What does the XPA section mean for interchangeability and power capacity?

XPA is a metric V-belt profile with 13 mm top width and 10 mm thickness that fits standard XPA pulleys and carries the rated load for this cross-section.

What pulley groove and centre distance do I need for this belt to fit?

Use an XPA-profile pulley with 13 mm groove width and set the centre distance so the 2120 mm outside length seats with proper tension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.