We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cogged V-belt, 1532 mm outside length, 13 mm wide, 10 mm thick

Gates

Gates XPA1532 Metric V-Belt 1532mm

SKU CH-QSP0-WCDV2

A metric V-belt with 1532 mm outside length, 13 mm top width and 10 mm thickness, built from fibre-loaded elastomeric compound with polyester tensile cords for heat, oil.

  • 1532 mm outside length fits XPA drives
  • Cogged raw-edge design reduces bending stress
  • Polyester tensile cords resist stretch under load
  • Operates from −30 °F to 140 °F
  • Resists heat, oil, ozone and flame

Gates XPA1532 Metric V-Belt

The Gates XPA1532 is a metric V-belt designed for industrial lifting, pulling and conveying applications. It suits maintenance engineers and plant operators who need a direct replacement for drives specifying an XPA section and a 1532 mm outside length.

Cogged Raw-Edge Construction

A cogged, raw-edge profile reduces bending stress and improves grip on small pulleys compared with wrapped belts. The fiber-loaded elastomeric compound with polyester tensile cords resists heat, oil, ozone and flame, extending service life in contaminated environments.

Capacity and Headroom

The belt operates reliably from -30 to 140 degrees Fahrenheit, covering most indoor and sheltered outdoor installations. Its 13 mm top width and 10 mm thickness limit torque capacity to drives matched to the XPA cross-section; it cannot serve heavier XPB or XPC profiles.

Highlights

  • 1532 mm outside length fits XPA drives
  • Cogged raw-edge design reduces bending stress
  • Polyester tensile cords resist stretch under load
  • Operates from −30 °F to 140 °F
  • Resists heat, oil, ozone and flame

Specifications

BrandGATES

Questions about this item

How often will the polyester tensile cords need replacement under normal tension?

The polyester tensile cords are built into the belt and are not separately replaceable; the entire belt is replaced when wear appears.

Which dimension limits the belt's service life first during continuous operation?

The 10 mm thickness and 13 mm top width wear progressively; when either dimension falls below specification the belt must be replaced.

What temperature range and heat resistance does the belt provide when running all day?

The belt operates from -30 °F to 140 °F and the fiber-loaded compound resists heat, oil, ozone and flame during sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.