We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 80W soldering iron kit with LED display, stand, five tips, solder wire and flux

FUMEIYI 80W Soldering Iron Kit Orange

SKU CH-8YW2-FX836

An 80 W soldering iron kit with LED display, adjustable 180–500 °C temperature, automatic sleep mode, five tips, solder wire, stand and flux for repair and DIY work

  • Watts80 watts
  • Heats to working temperature in 10 seconds with 80 W ceramic element
  • Adjustable range of 180 ° to 500 ° with automatic compensation
  • All-in-one kit includes five tips, solder wire, stand and flux
  • Ergonomic anti-slip handle plus four-hole heat dissipation for safe use
  • Lightweight portable design plugs in directly without a bulky station

FUMEIYI 80W Soldering Kit

The FUMEIYI 80W soldering iron kit targets DIY enthusiasts, hobbyists and repair technicians who need a complete, portable setup for electronics work. It ships with five tips, solder wire, a stand and flux so the user can start immediately without sourcing extra parts. The orange handle and lightweight body make it easy to carry between workbench and job site.

10-Second Heat-Up to 500 °C

An 80 W ceramic element brings the tip to working temperature in roughly ten seconds and reaches the 500 °C ceiling within forty seconds. The LED display shows the live reading across the 180 °C to 500 °C range while the control circuit compensates for drops so the set point stays steady during joints. Automatic sleep mode activates after inactivity to save power and extend tip life.

Plug-In Ready with Sleep Safety

The iron plugs directly into mains power with no separate station required; the heat-resistant thread plug and four-hole vented shroud keep the handle cool during long sessions. An ergonomic anti-slip grip reduces fatigue, while the integrated stand holds the hot tip securely between uses. Beginners should verify tip seating before first heat to avoid poor thermal contact.

Highlights

  • Heats to working temperature in 10 seconds with 80 W ceramic element
  • Adjustable range of 180 ° to 500 ° with automatic compensation
  • All-in-one kit includes five tips, solder wire, stand and flux
  • Ergonomic anti-slip handle plus four-hole heat dissipation for safe use
  • Lightweight portable design plugs in directly without a bulky station

Specifications

Watts80 watts

Questions about this item

How quickly does the 80 W ceramic heater reach working temperature in a real job?

The iron heats in about 10 seconds and hits its maximum temperature in roughly 40 seconds, so you can start soldering almost immediately after plugging it in.

What does the 180–500 °C adjustment range actually limit in practice?

The LED display lets you set any temperature between 180 °C and 500 °C, and the intelligent control compensates for fluctuations to keep the tip steady at the chosen value.

What does the kit include for mounting the iron safely on a bench?

A dedicated stand is supplied in the box, giving you a stable place to rest the hot iron between joints without needing a separate station.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.