We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel power venter, rectangular housing, 115V, 610k BTU

Field Controls

Field Controls PVG-600 Power Venter 115V 610k BTU

SKU CH-2W2Z-AJGF5

A 115V power venter for gas boilers, furnaces and water heaters up to 610,000 BTU with 5-inch vent connections

  • ColorTransparent
  • Vents gas appliances up to 610,000 BTUH input
  • Operates on standard 115V AC household power
  • Handles both natural gas and LP fuel types
  • Replaces Tjernlund HS1, HST-1 and HSUL-1 models
  • Galvanised steel construction for corrosion resistance

Power Venter for Gas Appliances

The Field Controls PVG-600 Power Venter provides mechanical draft for residential and light commercial heating systems. It operates on a 115V AC supply and is built from galvanized steel for durability. The unit handles gas-fired boilers, furnaces and water heaters up to 610,000 BtuH input.

Suitable for Single-Vent Installations

This venter suits installations that require a 5-inch vent pipe diameter for both inlet and outlet connections. It is not intended for oil-fired equipment or for appliances exceeding the rated gas input. Builders needing a different pipe size or oil compatibility should look at other models.

5-Inch Vent Pipe Diameter

The single specification that decides fit is the fixed 5-inch vent pipe diameter required at both inlet and outlet. The appliance vent connector must match this dimension exactly for safe operation.

Highlights

  • Vents gas appliances up to 610,000 BTUH input
  • Operates on standard 115V AC household power
  • Handles both natural gas and LP fuel types
  • Replaces Tjernlund HS1, HST-1 and HSUL-1 models
  • Galvanised steel construction for corrosion resistance

Specifications

BrandFIELD CONTROLS
ColorTransparent

Questions about this item

How many BtuH can the PVG-600 handle before it reaches its gas-appliance limit?

The maximum heater BTU input for gas appliances is 610,000 BtuH, so sustained firing above that level exceeds the venter's rated capacity.

What sound level or heat output should I expect when the 115 V motor runs continuously?

The 115 V AC motor drives a blower designed for 5-inch vent pipe; continuous operation produces typical inducer-fan noise and warm exhaust, but no specific decibel or surface-temperature figures are published.

Which vent-pipe diameter must already be in place for the PVG-600 to connect directly?

The unit requires a 5-inch vent pipe — both inlet and outlet are sized for 5-inch diameter, matching the minimum and maximum vent-pipe specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.