We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel draft inducer rectangular housing 5 to 8 inch inlet 115V 33W

Field Controls

Field Controls Draft Inducer Galvanized Steel 5-8in Inlet 115V 33W HVAC Control

SKU CH-HW3D-9TJYZ

Exhausts gas or oil heating appliances with a galvanised steel draft inducer rated at 115 V, 33 W and ETL listed

  • Reliable draft control for gas and oil heating systems
  • ETL agency compliance confirms safety standards met
  • Galvanized steel construction resists corrosion at 650°F
  • Low 33 W draw at 115 V reduces energy use
  • DI/CK adapter kit and pressure tube included for installation

Field Controls Draft Inducer 115V 33W

This galvanized steel draft inducer is built for gas and oil heating appliances that need powered venting. It operates on 115 volts and draws 0.43 amps at 33 watts, making it suitable for residential and light commercial HVAC systems requiring reliable exhaust performance.

Fits 5 to 8 inch inlet and outlet

The unit requires a 7 inch cut-out and measures 5 17/32 inches high by 8 13/16 inches wide by 8 3/32 inches deep. An included DI/CK adapter kit and pressure sensing tube simplify integration into existing flue configurations, freeing installers from fabricating custom transitions.

Handles 69,000 to 120,000 BTU input range at 650

This capacity covers many standard furnaces and boilers, while the ETL listing confirms compliance for safety. Systems demanding higher BTU throughput or temperatures beyond 650 degrees F will exceed the inducer's rated limits.

Highlights

  • Reliable draft control for gas and oil heating systems
  • ETL agency compliance confirms safety standards met
  • Galvanized steel construction resists corrosion at 650°F
  • Low 33 W draw at 115 V reduces energy use
  • DI/CK adapter kit and pressure tube included for installation

Specifications

BrandField controls

Questions about this item

How much power does the 115 V motor draw when the draft inducer runs continuously?

The motor is rated at 33 W and 0.43 Amps at 115 V, so that is the steady-state electrical load.

What temperature can the galvanized-steel housing reach during all-day operation?

The unit is rated for exhaust temperatures up to 650 Degrees F, which is the maximum heat the housing and internal components are designed to withstand.

Which vent-pipe diameters will fit the 5 to 8 in inlet and outlet without extra adapters?

The inducer accepts vent pipes from 3 to 6 in diameter directly; the included DI/CK adapter kit covers the 5 to 8 in inlet/outlet range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.