We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White thermoplastic hard hat with front brim and eight-point ratchet suspension

Fibre Metal

Fibre Metal SuperEight E2 ratchet hard hat, white

SKU CH-B4B4-5VXNJ

ANSI Type 1 Class G thermoplastic hard hat with 8-point ratchet suspension for sizes 6½–8

  • ColorWhite
  • ANSI Z89.1-2009 Type 1 Class G certified protection
  • 8-point ratchet suspension adjusts from size 6-1/2 to 8
  • Thermoplastic shell provides lightweight impact resistance
  • Welding helmet attachment lugs for accessory mounting
  • Front brim design deflects falling debris

Front-brim hard hat for general worksites

This white thermoplastic hard hat meets ANSI Z89.1-2009 Type 1 Class G requirements for top-impact and limited-voltage protection. The SuperEight E2 ratchet suspension adjusts across hat sizes 6-1/2 to 8 with an eight-point strap system for a secure fit. Built-in welding-helmet attachment lugs allow quick mounting of compatible face shields. No venting keeps debris out in dirty environments.

Upgrades from pin-lock or four-point suspensions

The ratchet mechanism lets you tighten or loosen the fit with one hand while wearing gloves, saving time on repetitive adjustments. Eight load-distribution points reduce pressure hot spots compared with older four-point designs during long shifts. The jump is worthwhile when daily donning and doffing cycles are high or when a welding helmet is swapped on and off regularly.

Check your site rules and accessory compatibility

Confirm that Type 1 Class G protection satisfies the safety plan for your project before ordering. Verify that the welding-helmet lugs match the specific shield or adapter you intend to use, as lug spacing is not universal. Ensure the non-vented shell aligns with any heat-stress or chemical-splash policies in force on the job.

Highlights

  • ANSI Z89.1-2009 Type 1 Class G certified protection
  • 8-point ratchet suspension adjusts from size 6-1/2 to 8
  • Thermoplastic shell provides lightweight impact resistance
  • Welding helmet attachment lugs for accessory mounting
  • Front brim design deflects falling debris

Specifications

BrandFIBRE-METAL BY HONEYWELL
ColorWhite

Questions about this item

What head sizes does the SuperEight E2 ratchet suspension fit?

The ratchet suspension adjusts to fit hat sizes 6-1/2 through 8, covering a wide range of head circumferences for secure all-day wear.

How do you install the SuperEight E2 suspension, and what step is often missed?

Insert the eight suspension keys into the corresponding shell slots until each clicks firmly; the step often missed is verifying all eight points are fully seated before tightening the ratchet.

When should the thermoplastic shell or suspension be replaced?

Replace the shell if it shows cracks, dents, or UV chalking, and replace the suspension if the ratchet mechanism slips or the webbing frays, as either compromises the ANSI Z89.1-2009 Type 1 Class G rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.