Festo
Festo FRC-1/8-D-MINI Service Unit 159604 22cm3
G1/8 service unit with 22 cm³ capacity for pneumatic test applications
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- G1/8 port fits compact pneumatic circuits
- 22 cm³ reservoir supplies steady pressure
- Red finish aids quick visual identification
- Test-equipment rating ensures reliable diagnostics
- Boxed single unit simplifies inventory handling
Service Unit for Pneumatic Systems
The Festo FRC-1/8-D-MINI service unit prepares compressed air for pneumatic circuits in industrial and workshop environments. It combines filtering, regulation and lubrication in a single compact housing. The G1/8 port size suits small-bore piping and low-flow applications. Technicians and maintenance engineers use it to protect downstream actuators and valves.
22 cm³ Bowl Capacity and Pressure Range
The 22 cm³ bowl volume holds condensate and oil mist for extended intervals between drain cycles. It handles typical shop-air pressures and regulates down to the low levels required by miniature cylinders. The unit reaches its limit when flow demand exceeds the capacity of the G1/8 ports or when bowl volume is insufficient for high-contamination environments.
G1/8 Port Thread Determines Fit
The G1/8 threaded connections are the single specification that decides compatibility with existing piping. Only systems designed for this thread size and the corresponding flow envelope can use the unit directly. Installations with larger ports or higher flow requirements need a different service unit.
Highlights
- G1/8 port fits compact pneumatic circuits
- 22 cm³ reservoir supplies steady pressure
- Red finish aids quick visual identification
- Test-equipment rating ensures reliable diagnostics
- Boxed single unit simplifies inventory handling
Specifications
| Brand | Festo |
|---|---|
| Model | FRC-1/8-D-MINI |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the G1/8 port on the FRC-1/8-D-MINI connect to my existing pneumatic lines?
Yes, the G1/8 port matches standard G1/8 fittings so it threads directly onto compatible lines without adapters.
How can I verify the 22cm3 service unit is regulating pressure correctly after installation?
Check the integrated gauge; the needle should hold steady at your set point and not creep when downstream demand changes.
Does the 159604 box include mounting brackets or just the service unit itself?
The box contains the service unit only; brackets, fittings and tubing must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213986BTC
In stock