We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent bolt-on circuit breaker, two poles, 40 amps, 120/240 volts

Federal Pacific

Federal Pacific UBIF240NB 40A 2 Pole 120/240V HVAC Control

SKU CH-JT2Y-QTSRJ

A 40 A, 2-pole bolt-on breaker rated 120/240 V AC with a 10 kA interrupting rating for Federal Pacific NBLP panels

  • ColorTransparent
  • 40 A two-pole rating handles 120/240 V HVAC loads
  • 10 kA interrupting capacity protects against short-circuit faults
  • Bolt-on design fits Federal Pacific NBLP commercial panels
  • ETL listed for verified safety compliance
  • Compact 3.36 in × 2.0 in × 2.55 in profile saves panel space

40 A two-pole circuit breaker

The Federal Pacific UBIF240NB is a bolt-on circuit breaker rated at 40 amps and 120/240 volts AC. It is designed for installation in compatible Federal Pacific NBLP commercial panels. The unit carries an ETL listing and a maximum AIR rating of 10 kA.

Capacity and headroom

The breaker handles continuous loads up to its 40-amp rating on two poles. It provides standard overcurrent protection for HVAC circuits within this limit. Applications requiring higher amperage or a different voltage rating will need a different device.

Interface and installation limits

The breaker uses a bolt-on connection method for secure mounting in the specified panel series. It measures 3.36 inches in length, 2.0 inches in width and 2.55 inches in depth. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

Highlights

  • 40 A two-pole rating handles 120/240 V HVAC loads
  • 10 kA interrupting capacity protects against short-circuit faults
  • Bolt-on design fits Federal Pacific NBLP commercial panels
  • ETL listed for verified safety compliance
  • Compact 3.36 in × 2.0 in × 2.55 in profile saves panel space

Specifications

BrandFEDERAL PACIFIC
ColorTransparent

Questions about this item

Will the 40 A UBIF breaker fit in the older Federal Pacific NBLP panel I still have?

Yes — it is built for Federal Pacific NBLP commercial panels, so the 40 A two-pole unit mounts directly on the existing bus.

How can I confirm the 120/240 V breaker is seated and carrying load correctly after install?

Snap the bolt-on breaker firmly onto the panel bus, then verify 120 V on each pole to neutral and 240 V across the two poles with a multimeter under load.

Does the box include mounting hardware or do I need separate bolts for the NBLP panel?

The bolt-on breaker arrives ready to mount; no extra bolts or clips are required for a compatible NBLP panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.