Fanttik NEX E2 Ultra Electric Screwdriver Set Grey 12 pack 50 bits
Precision electric screwdriver with 0.6 N·m max torque, 270 RPM motor, five torque gears, 50 S2 steel bits, 800 mAh battery and magnetic storage case
- Size/Dimensions6
- Maximum Voltage3.7 volts_of_direct_current
- Color/FinishGrey
- Item Count12 pack
- Selling UnitNEX E2 Ultra
- Hole Size Nominal5/32 inches
- Up to 0.6 N·m torque with five adjustable gears for delicate devices
- 270 RPM NeoPulse motor drives screws quickly through small electronics
- 800 mAh battery lasts 2.3 times longer than previous model
- RevoStor magnetic pop-up case keeps 50 S2 steel bits organized
- Gradient indicator bar shows torque gear and rotation direction at a glance
Precision Electric Screwdriver Set
The Fanttik NEX E2 Ultra is a cordless precision screwdriver designed for electronics repair and small-appliance assembly. It delivers up to 0.6N.m torque through a 270RPM NeoPulse motor with five selectable gears at 0.05, 0.1, 0.2, 0.4 and 0.6N.m. The set suits hobbyists and technicians working on phones, laptops, watches, game controllers and similar compact devices. It is not intended for large furniture, heavy appliances or high-torque structural work.
50-Piece S2 Steel Bit Collection
The kit includes 12 bit types totalling 50 high-strength S2 steel bits, a 1.78-inch HEX 2.0 long bit, a pry bar and tweezers. This variety covers common Phillips, Torx, hex and specialty heads found in modern consumer electronics. The RevoStor magnetic pop-up case keeps every bit organised and accessible. Users needing impact-rated bits, larger drive sizes or extensive hex/Allen sets beyond the supplied selection will find the assortment limited.
800mAh Battery with Type-C Charging
An 800mAh rechargeable cell provides 2.3 times the runtime of the earlier E1 MAX model, reducing recharge frequency during extended repair sessions. Charging uses a standard Type-C port for convenient power from common adapters or power banks. The gradient indicator bar displays the active torque gear and rotation direction at a glance. The 3.7V direct-current motor runs quietly at 270RPM with minimal vibration, suitable for bench work without hearing protection.
Highlights
- Up to 0.6 N·m torque with five adjustable gears for delicate devices
- 270 RPM NeoPulse motor drives screws quickly through small electronics
- 800 mAh battery lasts 2.3 times longer than previous model
- RevoStor magnetic pop-up case keeps 50 S2 steel bits organized
- Gradient indicator bar shows torque gear and rotation direction at a glance
Specifications
| Brand | Fanttik |
|---|---|
| Model | NEX E2 Ultra |
| Size/Dimensions | 6 |
| Maximum Voltage | 3.7 volts_of_direct_current |
| Color/Finish | Grey |
| Item Count | 12 pack |
| Selling Unit | NEX E2 Ultra |
| Hole Size Nominal | 5/32 inches |
| Number of Pins | Fanttik E2 Ultra Electric Screwdriver Set |
| Part Number | NEX E2 Ultra |
Questions about this item
Will the 0.6 N·m maximum torque and 5/32-inch bit holder damage the delicate screws in my vintage camera lenses?
The five torque gears (0.05/0.1/0.2/0.4/0.6 N·m) let you select the lowest setting for fragile fasteners, and the 5/32-inch HEX 2.0 holder accepts the included precision bits without over-torquing.
How can I verify the 270 RPM motor and gradient indicator bar are functioning correctly after first charge?
Fully charge via the Type-C port, select a gear, and watch the gradient bar light up while the motor runs; smooth rotation at the chosen speed confirms the NeoPulse motor and indicator are working.
Does the 12-pack RevoStor case include the 1.78-inch long bits, pry bar and tweezers, or must I buy them separately?
The set ships with 50 S2 steel bits (including the 1.78-inch HEX 2.0 length), a pry bar and tweezers all stored magnetically inside the aluminium RevoStor case — no extra purchase needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0020981BTC
In stock