We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular HSS cutter 15/16 inch diameter two inch depth

Evolution Power Tools

Evolution Power Tools CC937L 15/16" Annular HSS Cutter

SKU CH-NTQE-9PD0V

A 15/16-inch diameter annular HSS cutter with 2-inch depth of cut produces reamed, burr-free holes faster than twist drills

  • 15/16 inch diameter suits large hole drilling
  • 2 inch cutting depth handles thick material
  • Annular design cuts only the hole periphery
  • Produces reamed burr-free holes without extra work
  • Saves time and energy compared to twist drills

15/16" Annular HSS Cutter

The Evolution Power Tools CC937L annular cutter creates a 15/16" diameter hole with a 2" depth of cut. It is designed for use with magnetic drills in metalworking applications. By cutting only the hole periphery it produces a reamed, burr-free finish.

Capacity and headroom

The cutter handles holes up to 15/16" in diameter and material thickness up to 2". It saves time and energy compared with twist drills because less material is removed. The tool is not suited for larger diameters, deeper cuts or non-magnetic drill setups.

Upgrade path

This cutter replaces standard twist drills when a clean, finished hole is required in a single pass. The jump is worth it for repetitive metal drilling where burr removal would otherwise add a separate step. It does not address needs for smaller pilot holes or hand-held drilling.

Highlights

  • 15/16 inch diameter suits large hole drilling
  • 2 inch cutting depth handles thick material
  • Annular design cuts only the hole periphery
  • Produces reamed burr-free holes without extra work
  • Saves time and energy compared to twist drills

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

Will the 15/16" cutter fit the Weldon shank on my existing magnetic drill?

The cutter uses a standard Weldon shank that matches most magnetic drills, so it will fit the machine you already own.

How can I confirm the CC937L is cutting correctly once installed?

A clean, burr-free hole with a smooth finish shows the annular cutter is working as intended.

Does the box include pilot pins or cutting fluid, or must I buy them separately?

Only the 15/16" annular cutter is supplied; pilot pins and cutting fluid are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.