We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical annular cutter with fluted cutting edges and central pilot pin

Evolution Power Tools

Evolution Power Tools CC562L 9/16" x 2" Annular HSS Cutter

SKU CH-1731-DWQCF

A 9/16-inch diameter annular HSS cutter with 2-inch depth of cut for magnetic drills, producing reamed burr-free holes faster than twist drills

  • Cuts faster by removing only the hole perimeter
  • Produces a finished, burr-free hole without reaming
  • Saves time and energy versus standard twist drills
  • Designed for magnetic drill compatibility
  • Brand-new Evolution Power Tools annular cutter

Annular HSS Cutter for Magnetic Drills

The Evolution Power Tools CC562L is a 9/16 inch diameter annular cutter with a 2 inch cutting depth, made from high-speed steel. It is designed for use with magnetic drilling machines to create precise holes in structural steel and other ferrous metals. This accessory suits metal fabrication shops, maintenance teams and on-site contractors who need clean, accurate holes without the effort of conventional twist drilling.

Thermals Noise and Power Draw

Annular cutters remove only the perimeter material, so the magnetic drill motor encounters less resistance than with a solid twist drill of the same diameter. Reduced cutting force lowers heat generation at the tool tip and decreases the electrical load on the drill motor during normal operation. The cutting action runs quieter than aggressive twist drilling, and the burr-free finish eliminates a secondary deburring step that would add noise and time.

Upgrade from Twist Drills

Switching from standard twist drills to this annular cutter cuts drilling time and operator fatigue because less material is removed per hole. The jump is worth it when repetitive hole-making in thick plate or beam is required, especially where a reamed-quality finish is specified. Buyers who need larger diameters, deeper cuts or carbide-tipped life for abrasive alloys should look elsewhere, as this cutter is limited to the stated 9/16 inch by 2 inch high-speed steel specification.

Highlights

  • Cuts faster by removing only the hole perimeter
  • Produces a finished, burr-free hole without reaming
  • Saves time and energy versus standard twist drills
  • Designed for magnetic drill compatibility
  • Brand-new Evolution Power Tools annular cutter

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

How do I install the CC562L annular cutter on my magnetic drill, and what step is often missed?

Insert the cutter into the drill's arbor, align the flats with the set screws, and tighten securely; the step often missed is engaging the pilot pin before starting the cut.

What maintenance or replacement will the CC562L cutter need over time?

The high-speed steel teeth will dull with use and require resharpening or replacement; the pilot pin also wears and should be replaced when it no longer centres accurately.

What limit appears first when using the CC562L continuously on thick steel?

Heat buildup in the cutter body and cutting edges becomes the limiting factor, reducing cutting efficiency and requiring pauses for cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.