We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical annular cutter with fluted cutting edges and smooth shank

Evolution Power Tools

Evolution Power Tools CC150L Annular HSS Cutter 1-1/2" x 2

SKU CH-RNTY-91HP2

Cuts 1-1/2" diameter holes to 2" depth in metal using a magnetic drill, removing only the periphery for a faster, burr-free finish

  • Cuts faster by removing only the hole perimeter
  • Produces a reamed, burr-free finished hole
  • Saves time and energy versus twist drills
  • Designed for magnetic drill use
  • California Proposition 65 warning applies

Evolution Power Tools CC150L Annular HSS Cutter

The Evolution Power Tools CC150L is an annular cutter made from high-speed steel for use with magnetic drilling machines. It produces a 1-1/2 inch diameter hole to a 2 inch cutting depth by removing only the outer ring of material. This method creates a smooth, burr-free hole while saving time and energy compared to standard twist drills. It is designed for metalworking professionals and fabricators who need fast, clean holes in structural steel.

Installation is direct into a compatible magnetic

The cutter fits directly into the arbor of a suitable magnetic drill press with the correct shank interface. No complex alignment is required beyond securing the cutter in the chuck. The most common issue occurs if the shank size does not match the drill's arbor, preventing a secure fit. Using the cutter without adequate cutting fluid or at incorrect speeds can also reduce tool life and hole quality.

Suited for steel fabricators needing fast.

This tool suits workshops and site crews drilling structural steel where a clean, reamed finish eliminates secondary deburring. It is not intended for hand-held drilling or use in standard drill presses lacking a magnetic base and proper arbor. Buyers who need to drill non-ferrous metals, wood, or plastics should look at different cutting tools. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

Highlights

  • Cuts faster by removing only the hole perimeter
  • Produces a reamed, burr-free finished hole
  • Saves time and energy versus twist drills
  • Designed for magnetic drill use
  • California Proposition 65 warning applies

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

How can I confirm the CC150L cutter is producing a proper hole after installation?

A correctly working cutter will produce a reamed, finished, burr-free hole by cutting only the periphery, saving time and energy compared to twist drills.

What comes with the CC150L annular cutter and what must I purchase separately?

The box contains the 1-1/2" diameter x 2" depth HSS annular cutter; a compatible magnetic drill and pilot pin must be purchased separately.

Which cutter size should I choose for a 1-1/2" diameter hole with 2" depth?

Select the CC150L model, which is specified for exactly 1-1/2" diameter and 2" depth of cut in high-speed steel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.