We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular HSS cutter with cylindrical body and cutting teeth

Evolution Power Tools

Evolution Power Tools CC131 Annular HSS Cutter

SKU CH-FQZP-RFSYR

Cuts clean, burr-free holes in metal using a magnetic drill, removing only the periphery for faster results than twist drills

  • Annular design cuts only the hole edge, saving time and energy versus twist drills
  • Produces a reamed, burr-free finished hole without secondary operations
  • HSS construction suits magnetic-drill use in metal fabrication
  • 1-5/16" diameter with 1" cutting depth for precise holemaking
  • California Proposition 65 warning: contains chemicals known to cause cancer and reproductive harm

1-5/16" Annular HSS Cutter

The Evolution Power Tools CC131 is a high-speed steel annular cutter built for magnetic drill presses. It produces clean, burr-free holes by cutting only the outer edge of the material. This design saves time and energy compared to standard twist drills. It suits metal fabricators and maintenance teams needing fast, accurate hole-making.

Clean cutting with reduced effort

By removing only the hole periphery the cutter generates less heat and requires less feed force than a solid drill bit. The cutting action leaves a finished surface that often needs no secondary reaming. Lower resistance helps preserve magnetic drill motor life during repetitive drilling tasks. The cutter is ready for workshop or on-site use.

Replaces twist drills for through-holes

The annular design upgrades from conventional twist drills when speed and hole quality matter most. The efficiency gain is worth it for repetitive drilling in structural steel, plate or pipe where a finished hole reduces downstream work. It is not suited for blind holes, very thin sheet metal or non-magnetic drill setups.

Highlights

  • Annular design cuts only the hole edge, saving time and energy versus twist drills
  • Produces a reamed, burr-free finished hole without secondary operations
  • HSS construction suits magnetic-drill use in metal fabrication
  • 1-5/16" diameter with 1" cutting depth for precise holemaking
  • California Proposition 65 warning: contains chemicals known to cause cancer and reproductive harm

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

How do I install the Evolution CC131 annular cutter in a magnetic drill, and what step is often missed?

Insert the cutter into the drill arbor and secure it with the grub screw; the step often missed is aligning the pilot pin so it engages the centre hole before cutting begins.

What maintenance or replacement will the Evolution CC131 cutter need after extended use?

The HSS cutting edges will dull over time and require resharpening or replacement; the pilot pin may also wear and should be swapped when it no longer centres cleanly.

What limit appears first when using the Evolution CC131 continuously in thick steel?

Heat buildup in the high-speed steel teeth becomes the limiting factor, reducing cutting efficiency and requiring cooling breaks to prevent premature wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.