We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical annular cutter with HSS cutting edges

Evolution Power Tools

Evolution Power Tools CC118 Annular HSS Cutter

SKU CH-BS8X-QRCBA

A 1-3/16 inch diameter HSS annular cutter with 1 inch cutting depth for fast, burr-free holes in magnetic drills

  • Annular cutters cut only the hole periphery, saving time and energy versus twist drills
  • Produces a reamed, finished, burr-free hole for clean results
  • High-speed steel construction handles demanding magnetic-drill applications
  • Designed for use with Evolution magnetic drill systems
  • Model CC118 identifies the correct cutter for your setup

1-3/16" Annular HSS Cutter

The Evolution Power Tools CC118 is a high-speed steel annular cutter designed for magnetic drill presses. It creates clean, burr-free holes by removing only the perimeter material. This approach saves time and energy compared with conventional twist drills. The tool suits metal fabrication and maintenance tasks requiring precise, finished holes.

Thermals noise and power draw

As a non-powered cutting accessory, the CC118 generates no electrical noise or power consumption of its own. Heat produced during cutting depends on the magnetic drill's motor, feed rate, and workpiece material. Operators should follow the drill manufacturer's guidelines for duty cycles and lubrication to manage temperatures. The cutter's high-speed steel construction resists wear under normal industrial use.

Upgrade path and value

This cutter replaces twist drills and hole saws where a reamed, burr-free finish is needed in a single pass. The efficiency gain is most worthwhile when drilling multiple holes in structural steel or plate. It is not suited for handheld drills, non-magnetic drill presses, or materials outside the cutter's designated capacity. Buyers needing different diameters or cutting depths should select the appropriate size from the Evolution annular range.

Highlights

  • Annular cutters cut only the hole periphery, saving time and energy versus twist drills
  • Produces a reamed, finished, burr-free hole for clean results
  • High-speed steel construction handles demanding magnetic-drill applications
  • Designed for use with Evolution magnetic drill systems
  • Model CC118 identifies the correct cutter for your setup

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

How do I install the CC118 annular cutter in my magnetic drill, and what step do people often miss?

Fit the 1-3/16" diameter cutter into the drill's arbor and secure the retaining screw tightly; the step often missed is aligning the pilot pin so it engages the centre hole before cutting starts.

What maintenance or replacement will the CC118 HSS cutter need later?

The high-speed steel teeth will dull with use; plan to resharpen or replace the cutter once hole quality drops or feed force rises noticeably.

What limit appears first when using the CC118 continuously on thick steel?

Heat buildup in the 1" depth-of-cut zone is the first limit; without coolant the cutter loses hardness and cuts slower.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.