We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular HSS cutter with fluted cutting edges and Weldon shank

Evolution Power Tools

Evolution Power Tools CC112L 1-1/8" Annular HSS Cutter

SKU CH-MYGT-NJFDY

An annular HSS cutter that bores a clean, burr-free hole by removing only the perimeter material, saving time and energy versus twist drills

  • Cuts faster than twist drills by removing only the hole periphery
  • Produces a finished burr-free hole without secondary reaming
  • Saves time and energy on magnetic-drill operations
  • High-speed steel construction handles demanding metal-cutting tasks
  • California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm

1-1/8" Annular HSS Cutter

The Evolution Power Tools CC112L is an annular high-speed steel cutter with a 1-1/8 inch diameter and 2 inch depth of cut. It is designed for use with magnetic drilling machines in metal fabrication and maintenance work. The cutter produces a reamed, burr-free hole by removing only the perimeter material. Professionals who need fast, clean holes in structural steel will find it suitable.

Magnetic drill compatibility and material removal

This accessory fits magnetic drills that accept the corresponding shank, allowing immediate integration into existing drilling setups. Because it cuts only the hole periphery, it requires less feed force and consumes less power than a twist drill of the same diameter. The design frees up operator effort and reduces cycle time on each hole. Chips are ejected through the cutter body, keeping the work area clearer.

Upgrade from twist drills for large-diameter holes

Switching from a conventional twist drill to this annular cutter is worthwhile when drilling repetitive holes above one inch in steel plate or beam. The cutter leaves a finished hole that often eliminates secondary reaming or deburring steps. It is not intended for handheld drill motors, wood, masonry or non-ferrous alloys. Buyers who need smaller diameters or deeper cuts should select a different cutter from the range.

Highlights

  • Cuts faster than twist drills by removing only the hole periphery
  • Produces a finished burr-free hole without secondary reaming
  • Saves time and energy on magnetic-drill operations
  • High-speed steel construction handles demanding metal-cutting tasks
  • California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

How deep can the CC112L cutter bore in a single pass?

The cutter reaches a 2 inch depth of cut, so a standard magnetic drill can complete the hole without needing to step down.

How hot does the cutter get when run continuously in a mag drill?

Annular cutters only remove the hole perimeter, so they generate less friction and heat than a twist drill of the same diameter.

What shank style does the CC112L need to fit my magnetic drill?

It uses the standard 3/4 inch Weldon shank found on most Evolution and competitor magnetic drills.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.