We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular HSS cutter, 1-1/16 inch diameter, 1 inch depth

Evolution Power Tools

Evolution Power Tools CC106 Annular HSS Cutter

SKU CH-7VQT-XV9JM

A 1-1/16" diameter annular HSS cutter with 1" depth that cuts only the hole periphery for faster, burr-free results in magnetic drills

  • Cuts faster by removing only the hole perimeter
  • Produces a finished, burr-free hole without reaming
  • Saves time and energy versus twist drills
  • Designed for magnetic drill compatibility
  • California Proposition 65 warning for cancer and reproductive harm

Annular cutter for magnetic drills

The Evolution Power Tools CC106 is a high-speed steel annular cutter designed for use with magnetic drilling machines. It removes only the outer edge of a hole, leaving a solid slug and producing a smooth, burr-free finish. Professional fabricators and maintenance teams choose this style of cutter to reduce drilling time and energy consumption on structural steel and plate.

1-1/16 inch diameter and 1 inch depth of cut

The cutter’s cutting diameter is 1-1/16 inches and its maximum depth of cut is 1 inch, which are the two figures that determine whether it matches the hole size and material thickness required. Selecting a different diameter or depth will result in a hole that is either too large, too small, or not deep enough for the fastener or fitting intended.

Fits standard magnetic drill arbors

The cutter mounts directly into a standard magnetic drill arbor using its industry-standard shank, so no special adapters are required for compatible machines. A common mistake is running the cutter without adequate coolant or at excessive feed rates, which can overheat the high-speed steel teeth and shorten tool life.

Highlights

  • Cuts faster by removing only the hole perimeter
  • Produces a finished, burr-free hole without reaming
  • Saves time and energy versus twist drills
  • Designed for magnetic drill compatibility
  • California Proposition 65 warning for cancer and reproductive harm

Specifications

BrandEVOLUTION POWER TOOLS

Questions about this item

What does the 1-1/16" diameter mean when I fit this cutter in a magnetic drill?

The cutter produces a finished hole with a 1-1/16" diameter by removing only the outer ring of material, leaving a solid slug and a burr-free edge.

Which shank standard does the CC106 use and what depth limit does that impose?

The cutter fits standard Weldon shank magnetic drills and is rated for a maximum 1" depth of cut.

What physical clearance do I need above the workpiece to mount and run this cutter?

You need enough vertical travel for the 1" cutting depth plus the pilot pin and chuck engagement, so plan for at least 2" of clear quill stroke.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.