We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ball valve with vinyl lever handle

Everflow Supplies Inc.

Everflow Supplies Inc. 600M012-NL Brass Ball Valve 1/2

SKU CH-6TYC-E3KVZ

A full-port brass ball valve with a stainless steel ball, compression connections, PTFE seal and blow-out-proof stem for water control

  • Full-port design maximises flow through the valve
  • Stainless steel ball resists corrosion for long service
  • Blow-out-proof stem prevents stem ejection under pressure
  • PTFE seal ensures reliable, leak-free shut-off
  • Vinyl lever handle gives comfortable grip and easy operation

Brass compression ball valve

This 1/2 inch brass ball valve uses compression fittings for water control in piping systems. A stainless steel ball and PTFE seal provide reliable shut-off. The full-port design maintains flow without restriction. A vinyl lever handle allows easy manual operation.

Replaces threaded or solder valves

Switch to this valve when you need a secure joint without soldering or pipe thread tape. The compression ends suit copper or CPVC tubing where a blow-out proof stem adds safety. It is not suited for gas lines or high-pressure steam systems.

Simple compression installation

Slide the nut and ferrule onto clean tubing, insert into the valve body, and tighten the nut by hand then with a wrench. Over-tightening can distort the ferrule and cause leaks. Always wash hands after handling because the brass contains lead.

Highlights

  • Full-port design maximises flow through the valve
  • Stainless steel ball resists corrosion for long service
  • Blow-out-proof stem prevents stem ejection under pressure
  • PTFE seal ensures reliable, leak-free shut-off
  • Vinyl lever handle gives comfortable grip and easy operation

Specifications

BrandEVERFLOW

Questions about this item

What pipe size does the 1/2 inch compression connection on this brass ball valve fit?

The valve uses a 1/2 inch compression connection designed for standard 1/2 inch copper or CTS tubing.

How do I install the compression fittings on this valve without causing leaks?

Slide the compression nut and ferrule onto the tubing, insert the tube fully into the valve body, then tighten the nut firmly by hand plus one wrench turn — do not overtighten or the ferrule may deform.

Will the PTFE seal or vinyl lever handle on this valve need periodic replacement?

The PTFE seal is designed for long service life under normal water pressure; the vinyl handle may become brittle after years of UV exposure and can be replaced if it cracks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.