We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red handheld AC/DC clamp leakage meter with narrow jaw and digital display

ETCR

ETCR ETCR6000 AC/DC Clamp Leakage Current Meter 60.0A

SKU CH-B13T-0WWP9 MPN ETCR6000

Measures AC/DC leakage current up to 60.0A with 99-group data storage and RS232 computer interface for analysis

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Measures AC/DC leakage current up to 60.0A for comprehensive electrical safety testing
  • Stores 99 data groups internally for later analysis and documentation
  • Transfers stored readings to PC via RS232 interface for detailed reporting
  • Compact 168mm×65mm×34mm clamp with 7mm jaw fits tight cable bundles
  • Operates 30 hours on a single 9V battery for extended field use

Electrician leakage clamp meter 60.0A

The ETCR ETCR6000 measures AC and DC leakage current from 0mA to 60.0A on lines up to 600V. Its 7mm clamp jaw fits tightly spaced flat cables in power metering, rail and automotive maintenance. The tool stores 99 reading groups and transfers them over RS232 for analysis. It runs on a 9V battery for about 30 hours of continuous use.

Compatibility check before ordering

Verify that the conductors you will test fit within the 7mm clamp opening and that the circuit voltage does not exceed 600V. Confirm you need AC/DC leakage measurement rather than general high-current clamping. Ensure you can supply a 6F22 9V zinc-manganese battery as none is included. The RS232 link requires a serial port or suitable adapter on your computer.

Thermals noise and power draw

Handheld operation stays cool because the clamp measures without contact and draws minimal power from the 9V cell. No fan or active cooling is present so the meter is silent during use. Expected battery life is roughly 30 hours under continuous measurement. The compact 168mm by 65mm by 34mm body adds negligible weight to a tool belt.

Highlights

  • Measures AC/DC leakage current up to 60.0A for comprehensive electrical safety testing
  • Stores 99 data groups internally for later analysis and documentation
  • Transfers stored readings to PC via RS232 interface for detailed reporting
  • Compact 168mm×65mm×34mm clamp with 7mm jaw fits tight cable bundles
  • Operates 30 hours on a single 9V battery for extended field use

Specifications

BrandETCR
Model6000B
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What comes in the box and do I need to buy a 9 V battery separately?

The meter ships as a single unit in a box; it requires a 6F22 9 V zinc-manganese dry battery which is not included.

The model is listed as ETCR6000B — is that the only version available?

The supplied data shows only the ETCR6000B model with RS232 interface and a 7 mm clamp jaw.

How does the 60.0 A range perform on a live 600 V circuit?

It measures AC or DC leakage current up to 60.0 A on circuits below 600 V, stores 99 readings and runs for about 30 hours per battery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.