We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red handheld wireless high voltage phase detector model 1500

ETCR

ETCR 1500 Wireless High Voltage Phase Detector 10V-500kV 200m

SKU CH-8Z2F-VGBX7 MPN 1500

Wirelessly detects phase, sequence and live status on lines from 10 V to 500 kV up to 200 m away

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Wireless operation up to 200 m for safe distance testing
  • Covers 10 V to 500 kV for wide voltage range
  • Contact and non-contact modes suit lines above and below 35 kV
  • Rechargeable 3.7 V lithium batteries power both host and detector
  • Measures phase angle 0°–360° and frequency 45.0–65.0 Hz

Wireless High Voltage Phase Detector 10V-500kV

The ETCR 1500 detects phase angle, sequence and voltage presence on live conductors from 10 V up to 500 kV. It operates at distances up to 200 m, making it suitable for substation and overhead-line work. The unit covers a frequency range of 45.0 Hz to 65.0 Hz.

Contact and non-contact detection modes

For circuits at or below 35 kV the instrument uses direct contact probing. Above 35 kV the non-contact method is required, allowing the probe to approach the conductor without metallic connection. Both modes share the same 0° to 360° phase measurement range.

200 m wireless operating distance

Phase detection is performed wirelessly between the host and detector up to 200 m apart. The host runs on a 3.7 V 2600 mAh rechargeable lithium battery and the detector on a 3.7 V 600 mAh rechargeable lithium battery. This range determines whether the tool can span the required switchgear or line separation.

Highlights

  • Wireless operation up to 200 m for safe distance testing
  • Covers 10 V to 500 kV for wide voltage range
  • Contact and non-contact modes suit lines above and below 35 kV
  • Rechargeable 3.7 V lithium batteries power both host and detector
  • Measures phase angle 0°–360° and frequency 45.0–65.0 Hz

Specifications

BrandETCR
Model1500
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How often will I need to replace the rechargeable lithium batteries in the host and detector units?

The host uses a 3.7V 2600mAh battery and the detector uses a 3.7V 600mAh battery; both are rechargeable lithium packs that typically last several years before capacity drops enough to require replacement.

What voltage level forces me to switch from contact to non-contact phase detection during sustained use?

You must switch to non-contact mode when the line voltage exceeds 35kV; the probe then gradually approaches the conductor for safe phase detecting up to 500kV.

How much heat or noise does the detector produce when operating continuously at the 200m range?

The detector runs on a low-power 3.7V 600mAh lithium battery with no moving parts, so it generates negligible heat and operates silently during all-day use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.