We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten beige PLA+ spools in vacuum-sealed packaging

eSUN

eSUN PLA+ Filament 1.75mm Skin 10 Rolls 1KG

SKU CH-PN5M-MYZMM

Ten 1 kg spools of 1.75 mm PLA+ filament in Skin colour, dimensionally accurate to ±0.03 mm and wound for tangle-free feeding on all FDM printers

  • ColorSkin
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor All FDM 3D Printer

Color Skin

Show 7 more configurations
  • Ten 1 kg spools give 10 kg total filament for batch printing
  • +/- 0.03 mm diameter tolerance ensures consistent feeding and stable prints
  • PLA+ formulation delivers higher strength and toughness with low shrinkage
  • Tangle-free winding and 340-350 m per roll prevent nozzle clogs
  • Works with all FDM printers at 40-100 mm/s print speeds

Bulk PLA+ bundle for print farms

This eSUN PLA+ bundle supplies ten 1 kg spools of Skin coloured filament for continuous production. The material is an enhanced PLA with higher strength and toughness than standard grades. Low shrinkage and minimal warping keep large parts dimensionally stable during long prints. Plant-based starch content makes it suitable for indoor environments.

Tangle-free spools with tight tolerance

Each spool holds 340 to 350 metres of 1.75 mm filament wound to a ±0.03 mm diameter tolerance. Neat winding prevents overlaps that cause jams during unattended runs. Vacuum-sealed packaging with desiccant preserves dryness until the spool is opened. The filament feeds smoothly through direct-drive and Bowden extruders alike.

Prints at 210 to 230 °C on any FDM printer

Recommended nozzle temperature is 215 °C with a heated bed at 45 to 60 °C. Print speeds of 40 to 100 mm/s at full fan speed are supported on high-speed machines. Compatible with Bambu Lab, Creality K1 and AnkerMake platforms. Buyers needing exotic colours or engineering-grade heat resistance should choose a different material.

Highlights

  • Ten 1 kg spools give 10 kg total filament for batch printing
  • +/- 0.03 mm diameter tolerance ensures consistent feeding and stable prints
  • PLA+ formulation delivers higher strength and toughness with low shrinkage
  • Tangle-free winding and 340-350 m per roll prevent nozzle clogs
  • Works with all FDM printers at 40-100 mm/s print speeds

Specifications

BrandeSUN
ColorSkin
MaterialPLA
Diameter1.75 mm
Compatible SystemFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What filament diameter does the 1.75 mm PLA+ spool use, and how tight is the tolerance?

The filament is 1.75 mm with a dimensional tolerance of +/- 0.03 mm for consistent feeding.

What spool mass and total length are supplied per roll in the 10 roll bundle?

Each roll is 1 kg (2.2 lbs) and provides 340 to 350 metres of filament.

What nozzle and bed temperatures should I set for the first print with this PLA+?

Start at 215 °C nozzle and 45 to 60 °C bed; the full range is 210 to 230 °C nozzle and 45 to 60 °C bed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.