We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten white 1 kg spools of 1.75 mm PLA+ filament in vacuum bags

eSUN

eSUN PLA+ Filament 1.75 mm White 10 kg (10 × 1 kg)

SKU CH-4494-6RZ25

Ten 1 kg spools of 1.75 mm white PLA+ filament with ±0.03 mm tolerance for high-speed FDM printing

  • ColorWhite
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor All FDM 3D Printer

Color White

Show 7 more configurations
  • 10 spools of 1 kg each enable uninterrupted batch printing
  • PLA+ formulation delivers higher strength and toughness than standard PLA
  • Dimensional tolerance of ±0.03 mm ensures consistent feeding and stable prints
  • Tangle-free winding and clog-free extrusion support reliable high-speed printing
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Bulk PLA+ bundle for print farms

This eSUN PLA+ bundle delivers ten 1 kg spools of white 1.75 mm filament, totalling 10 kg for batch printing on FDM machines. Each spool provides 340 to 350 metres of material wound for continuous feeding. The filament is vacuum-sealed with desiccant to stay dry and dust-free until opened.

Suits high-volume operators, not casual users

Print farms and makers running long, unattended jobs benefit from the consistent diameter tolerance of ±0.03 mm and the tangle-free winding that prevents feed interruptions. Hobbyists who only print occasional small models will find the ten-spool quantity excessive and the bulk packaging unnecessary for their needs.

Handles large runs at up to 100 mm/s

Printing at 40 to 100 mm/s with a nozzle temperature of 210 to 230 °C and a bed at 45 to 60 °C, the PLA+ maintains layer adhesion and low warping across big build plates. Very large single prints that exceed the 340 to 350 m per spool length will require a mid-print filament change, which the consistent winding makes straightforward.

Highlights

  • 10 spools of 1 kg each enable uninterrupted batch printing
  • PLA+ formulation delivers higher strength and toughness than standard PLA
  • Dimensional tolerance of ±0.03 mm ensures consistent feeding and stable prints
  • Tangle-free winding and clog-free extrusion support reliable high-speed printing
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

Specifications

BrandeSUN
ColorWhite
MaterialPLA
Diameter1.75 mm
Compatible SystemFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my FDM printer need a heated bed to use this 1.75 mm PLA+?

Yes, the recommended bed temperature is 45-60 °C for proper adhesion and reduced warping.

Will the ±0.03 mm diameter tolerance work reliably with the direct-drive extruder on my older machine?

The tight tolerance and consistent winding are designed to feed smoothly through both direct-drive and Bowden setups without grinding or slipping.

How can I confirm the filament is printing correctly once I start a job?

Watch for even layer lines, minimal stringing, and steady extrusion at 215 °C with the cooling fan at 100 %; a clean first layer on a textured sheet or PEI surface indicates proper flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.