We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten 1 kg spools of Peak Green PLA+ filament in vacuum-sealed packaging

eSUN

eSUN PLA+ Filament 1.75mm Peak Green 10kg 10 Spool Pack

SKU CH-MN80-VQGB2

Ten 1 kg spools of 1.75 mm PLA+ in Peak Green, ±0.03 mm tolerance, 340–350 m per roll, prints at 210–230 °C

  • ColorPeak Green
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor All FDM 3D Printer

Color Peak Green

Show 7 more configurations
  • 10 spools at 1 kg each for large print farms
  • PLA+ formulation gives higher strength and toughness than standard PLA
  • Dimensional tolerance of ±0.03 mm ensures consistent feeding
  • Vacuum-sealed bags with desiccant keep filament dry and dust-free
  • Compatible with all FDM printers including high-speed models

Bulk PLA+ Pack for Print Farms

The eSUN PLA+ bundle delivers ten 1 kg spools of 1.75 mm filament in Peak Green, totalling 10 kg for continuous batch printing. Each roll provides 340–350 metres of material wound to a dimensional tolerance of ±0.03 mm. The formulation uses plant-based starch for low odour indoor use and is vacuum sealed with desiccant to maintain dry storage condition.

Upgrade from Standard PLA

PLA+ replaces ordinary PLA when higher strength, better toughness and reduced brittleness are required for functional parts. The tighter diameter control and consistent winding minimise nozzle clogging and extruder skipping during long unattended runs. The jump is worthwhile for print farms that need reliable high-speed throughput without frequent filament changes or failed prints.

Suited for High-Volume FDM Operators

This pack suits operators running multiple FDM printers who value colour consistency across large jobs and need clog-free feeding at speeds up to 100 mm/s. Users printing only occasional small models or those requiring engineering-grade heat resistance should look at alternative materials better matched to low-volume or high-temperature applications.

Highlights

  • 10 spools at 1 kg each for large print farms
  • PLA+ formulation gives higher strength and toughness than standard PLA
  • Dimensional tolerance of ±0.03 mm ensures consistent feeding
  • Vacuum-sealed bags with desiccant keep filament dry and dust-free
  • Compatible with all FDM printers including high-speed models

Specifications

BrandeSUN
ColorPeak Green
MaterialPLA
Diameter1.75 mm
Compatible SystemFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.75 mm diameter spools fit a standard FDM printer holder?

Yes, the 1.75 mm diameter matches the standard filament path used by all FDM printers listed, so the spools mount directly on common holders.

What bed temperature and nozzle temperature should I set for the first layer?

Set the bed between 45 and 60 °C and the nozzle to 215 °C for the first layer; the recommended range is 210 to 230 °C.

How should I store the remaining spools after opening the vacuum pack?

Keep unused spools in the vacuum bag with the desiccant, or move them to an airtight container with fresh desiccant to prevent moisture absorption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.