Estry
Estry SRS-X1 1000mAh 3.7V lithium battery
Replacement lithium battery delivering 1000mAh at 3.7V for SRS-X1, SRS-WS1, MDR-XB950N1 and WH-CH700N devices
- TypeBatteries
- Battery Pack1-pack
- Battery TypeLithium
- Battery Capacity1000mAh
- Battery Voltage3.7
- Exact-fit replacement for SRS-X1 and WH-CH700N
- 1000mAh 3.7V lithium cell delivers reliable runtime
- Built-in overcharge and short-circuit protection
- Certified to ISO9001, RoHS, CE and UN38.3
- Compact 47.56 x 32.2 x 6.4 mm design weighs 45.4g
Replacement battery for Sony audio models
The Estry SRS-X1 is a 1000mAh 3.7V lithium pack built to original specifications for the SRS-X1, SRS-WS1, MDR-XB950N1 and WH-CH700N devices. It replaces part numbers A-2215-026-A, LIS1553HNPCS, LIS1553(SY6) and LIS1553. The cell measures 47.56 x 32.2 x 6.4mm and weighs 45.4g.
Thermals and safety protections
The pack includes overcharge, over-discharge, over-voltage and short-circuit protection circuits that limit temperature rise during normal charging and playback. Rated at 3.7Wh, it draws modest current and runs cool in typical headphone or speaker use. Certifications cover ISO9001, RoHS, CE, UN38.3 and MSDS.
What the certifications and fitment give you
RoHS approval confirms the cell contains no restricted hazardous substances. CE and ISO9001 marks verify manufacturing quality controls. UN38.3 clearance means the battery passes transport safety tests for shipping. The exact dimensional match ensures the pack seats correctly in the listed Sony models without modification.
Highlights
- Exact-fit replacement for SRS-X1 and WH-CH700N
- 1000mAh 3.7V lithium cell delivers reliable runtime
- Built-in overcharge and short-circuit protection
- Certified to ISO9001, RoHS, CE and UN38.3
- Compact 47.56 x 32.2 x 6.4 mm design weighs 45.4g
Specifications
| Type | Batteries |
|---|---|
| Battery Pack | 1-pack |
| Battery Type | Lithium |
| Battery Capacity | 1000mAh |
| Battery Voltage | 3.7 |
Questions about this item
How do I fit the SRS-X1 1000mAh 3.7V lithium battery into my device, and which step often goes wrong?
Power off the device, open the battery compartment, disconnect the old pack, insert the new 47.56 x 32.2 x 6.4 mm cell with the connector aligned to the correct polarity, then close the cover. The step users miss is verifying the connector orientation before pressing it in; reversed pins prevent the device from powering on.
What replacement will the SRS-X1 1000mAh 3.7V lithium battery need later?
The 1000 mAh lithium cell itself is the only replaceable part; when runtime falls noticeably short of the original 3.7 Wh rating, purchase another SRS-X1 pack (part numbers A-2215-026-A, LIS1553HNPCS, LIS1553(SY6) or LIS1553) and swap it the same way.
What limit appears first during sustained use of the SRS-X1 1000mAh 3.7V lithium battery?
The built-in protection circuit cuts output if voltage drops below the safe threshold, if current exceeds the design limit, or if the cell temperature rises too high, so the first limit you hit under heavy load is the over-current or thermal shutdown rather than total capacity loss.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



