enshute-TC12015A 120V 15A hvac control 12 pack
A 12-pack of 120V 15A plug-in thermostats with sensor, timer and heating/cooling modes
- TypeHeating and Cooling Control with Sensor, Cooling, Heating, T
- ColorWhite
- Mount TypeSurface Mount
- Item Count12 pack
- Selling Unit1, Heating and Cooling Control with Sensor
- FeaturesProgrammable, Sekelo
- Plug-and-play 120 V outlet handles up to 15 A loads
- Heating and cooling modes switch automatically across -40 °F to 210 °F range
- Four timer modes offer 0-99 hours 59 minutes of cycle or countdown control
- Temperature calibration ±9.9 °F plus memory retains settings after power loss
- Twelve-pack supplies multiple greenhouses, reptile enclosures or brewing vessels
12-pack digital thermostat controllers for heating
Each unit is a surface-mount plug-and-play outlet rated at 120VAC and 15A maximum current. The controllers suit greenhouses, reptile enclosures, home brewing, fermentation and other temperature-critical setups. An LCD display shows the measured temperature and active mode. The 12-pack quantity supports multi-zone installations or spare units.
Thermals noise and power draw in normal use
The controller itself consumes minimal power while switching connected loads up to 15A at 120V. No internal fan or active cooling is described, so operation is silent. Temperature accuracy is rated at ±1% across a -40°F to 210°F control range. Calibration adjustment of -9.9°F to +9.9°F compensates for sensor placement.
Behaviour under sustained load
Timer modes F01 through F04 handle cycles, countdowns and delayed on/off sequences up to 99 hours 59 minutes. Temperature control and timer functions cannot run simultaneously, so sustained automated cycling relies on the temperature differential logic. A memory function retains all settings through power outages, and a reset restores factory defaults when needed.
Highlights
- Plug-and-play 120 V outlet handles up to 15 A loads
- Heating and cooling modes switch automatically across -40 °F to 210 °F range
- Four timer modes offer 0-99 hours 59 minutes of cycle or countdown control
- Temperature calibration ±9.9 °F plus memory retains settings after power loss
- Twelve-pack supplies multiple greenhouses, reptile enclosures or brewing vessels
Specifications
| Type | Heating and Cooling Control with Sensor, Cooling, Heating, Touch |
|---|---|
| Brand | Sekelo, enshute |
| Model | enshute-TC12015A |
| Color | White |
| Mount Type | Surface Mount |
| Item Count | 12 pack |
| Selling Unit | 1, Heating and Cooling Control with Sensor |
| Features | Programmable, Sekelo |
| Part Number | SK015 |
Questions about this item
How do I mount the surface-mount TC12015A and what wiring step is often missed?
Mount the white plastic housing on a flat surface with screws, then plug the 120 VAC supply into the controller and your heater or cooler into the outlet; the step often missed is verifying the load does not exceed 15 A before turning it on.
What part will need replacement first on the TC12015A after long use?
The internal relay that switches the 15 A load is the wear item; its contacts degrade with each heating or cooling cycle, so plan to replace the whole unit when switching becomes unreliable.
What limit appears first when the TC12015A runs continuously at high load?
The 15 A maximum working current is the hard limit; sustained loads above that will trip the protection or overheat the relay, so keep total connected equipment at or below 15 A.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0021178BTC
In stock