We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Enfain Mini SAS SFF-8087 to SAS 36p braided cable 1m

Enfain

Enfain MINI SAS 36PSFF-8087 to SAS 36p cable 1m

SKU CH-BP4J-X9HAY

Connects a Mini SAS SFF-8087 port to a 36-pin SAS device using a nylon-braided cable

Length 1m

  • Connects 36-pin SFF-8087 to 36-pin SAS for internal storage
  • Nylon braided jacket protects cable during server installations
  • SAS interface supports SATA drives for flexible drive choices
  • One metre length suits typical motherboard to drive bay routing

Internal SAS cable for RAID cards and servers

This Enfain cable connects a MINI SAS 36PSFF-8087 port on a 4i array card to a 36-pin SAS backplane or drive cage. The nylon-braided jacket protects the conductors inside server chassis and workstation builds. It is intended for administrators wiring internal storage arrays.

SAS and SATA drive support with one-metre reach

The link carries SAS signalling and is backward compatible with SATA drives, so both drive types can attach to the same controller. At one metre the cable spans typical motherboard-to-backplane distances but will not reach between widely separated enclosures or full-height rack runs.

Highlights

  • Connects 36-pin SFF-8087 to 36-pin SAS for internal storage
  • Nylon braided jacket protects cable during server installations
  • SAS interface supports SATA drives for flexible drive choices
  • One metre length suits typical motherboard to drive bay routing

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the SFF-8087 connector work with my existing SATA hard drives?

Yes, the SAS interface is backward compatible with SATA at the physical and protocol layers, so SATA drives can be used directly in a SAS environment.

How can I confirm the 36-pin connections are seated correctly after installation?

Ensure both the MINI SAS 36P and SFF-8087 ends click firmly into their ports; the nylon braided jacket should run straight without sharp bends, and the server or RAID controller should detect all attached drives on boot.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.