We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS 36-pin SFF-8087 to four SATA 90-degree connectors cable

Enfain

Enfain Mini SAS 36P SFF-8087 to 4 SATA 90-degree cable

SKU CH-FH8M-8C22F

Connects a Mini SAS 36-pin SFF-8087 controller to four SATA drives with 90-degree connectors for 12 Gbps bandwidth

Length 0.5m

  • Connect four SATA drives with one Mini SAS 36P SFF-8087 port
  • 90-degree SATA connectors ease routing in tight cases
  • Supports 12Gbps aggregate bandwidth across four lanes
  • Each lane runs at 3Gbps for reliable data transfer
  • Standard cable length ranges from .5 to 1 metre

Mini SAS 36P SFF-8087 to 4 SATA 90-degree cable

This Enfain cable connects a Mini SAS 36P SFF-8087 port on an internal array card to four SATA 7-pin drives. The 90-degree bend on the SATA ends helps route wires in tight chassis spaces. It serves builders adding multiple hard drives or SSDs to a server or workstation backplane. Buyers needing a straight SATA connector or an external Mini SAS HD interface should choose a different cable.

Thermals noise and power draw

As a passive copper assembly, the cable generates no heat and produces no audible noise during operation. It draws no auxiliary power beyond the signal lines provided by the host controller. The 90-degree SATA plugs reduce strain on drive ports, which helps maintain reliable contact over time. No active cooling or power budget considerations apply to this component.

Bundled accessories and software

The package contains only the cable itself; no mounting brackets, drive screws or configuration utilities are included. The 90-degree SATA ends are the sole design feature that changes installation, allowing cleaner routing against drive cages or side panels. Length options of 0.5m to 1m let builders select the shortest practical run to minimise signal loss. No firmware or driver installation is required for operation.

Highlights

  • Connect four SATA drives with one Mini SAS 36P SFF-8087 port
  • 90-degree SATA connectors ease routing in tight cases
  • Supports 12Gbps aggregate bandwidth across four lanes
  • Each lane runs at 3Gbps for reliable data transfer
  • Standard cable length ranges from .5 to 1 metre

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 90-degree SATA connectors on this SFF-8087 cable without straining the ports?

Align each 90-degree SATA plug straight onto the drive port before pressing; forcing it at an angle bends the fragile 7-pin connector. Route the .5 to 1m cable so the right-angle bend sits naturally against the drive chassis, not pulled tight across the backplane.

What maintenance or replacement will the SFF-8087 to 4 SATA cable need over time?

Inspect the 36-pin SFF-8087 latch and the four 90-degree SATA ends whenever drives are swapped; replace the cable if any latch tab cracks or if a SATA pin feels loose, because the 12Gbps signal path degrades with physical wear.

What limit appears first when the cable runs at 12Gbps continuously?

The 3Gbps per lane specification across four lanes caps sustained throughput at 12Gbps; signal integrity on the .5 to 1m run becomes the bottleneck before the controller or drives reach their own limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.