Enfain
Enfain Mini SAS 36P SFF-8087 to 4 SATA 90-degree cable 1m
Connects an SFF-8087 port to four SATA drives with 90-degree plugs for tight spaces and 12 Gbps bandwidth
Length 1m
- 0.5m
- 1m
- Connect four SATA drives via one Mini SAS 36P port
- 90-degree SATA plugs fit tight drive bays and chassis corners
- 12 Gbps aggregate bandwidth across four 3 Gbps lanes
- SFF-8087 connector matches standard 4i RAID and HBA cards
- One metre length suits typical server and workstation builds
Internal 12 Gbps SAS breakout
This Enfain Mini SAS cable connects an SFF-8087 port on a controller to four SATA drives. The 36-pin plug splits into four 7-pin SATA connectors with a 90-degree bend for tight drive bays. It is built new and rated for 12 Gbps aggregate bandwidth across four 3 Gbps lanes.
Builders with internal SFF-8087 controllers
Suits anyone wiring SATA hard drives or SSDs to a RAID or HBA card that presents a mini SAS 4i interface. The right-angle SATA ends help in crowded chassis where straight plugs would hit the side panel. It is not for external enclosures, direct backplane attachment, or systems lacking an SFF-8087 host port.
1 m length with 90-degree SATA ends
The cable measures 1 m from end to end, giving enough reach for full-tower routing without excess slack. Each SATA connector is bent 90 degrees so drives can sit close to the motherboard tray or backplane. Verify your controller uses the SFF-8087 pinout before ordering.
Highlights
- Connect four SATA drives via one Mini SAS 36P port
- 90-degree SATA plugs fit tight drive bays and chassis corners
- 12 Gbps aggregate bandwidth across four 3 Gbps lanes
- SFF-8087 connector matches standard 4i RAID and HBA cards
- One metre length suits typical server and workstation builds
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Will the 90-degree SATA plugs on this cable fit alongside my existing SFF-8087 HBA without blocking adjacent slots?
The 90-degree bends keep each SATA connector low-profile, so four drives can attach to the SFF-8087 port without protruding into neighbouring card slots or drive bays.
How can I verify the 12Gbps link is active after connecting four drives to the SFF-8087 end?
Check the HBA or RAID controller BIOS and OS disk utility — each drive should negotiate a 12Gbps SAS link and show the expected throughput in SMART data or benchmark tools.
Does the 1m Enfain cable ship with the SFF-8087 bracket or four SATA power adapters included?
Only the Mini SAS 36P SFF-8087 to 4 SATA 90-degree data cable is supplied; mounting brackets and SATA power cables must be sourced separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








