We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD 36-pin SFF-8643 to four SATA 7-pin cable, 1 metre

Enfain

Enfain Mini SAS HD36P SFF-8643 to 4×SATA 7P cable 1m

SKU CH-GZX4-4S50N

Connects a Mini SAS HD SFF-8643 port to four SATA drives at up to 12 Gb/s

Length 1m

  • Connects Mini SAS HD 36-pin to four SATA 7-pin drives
  • Supports signal rates from 6 Gb/s to 12 Gb/s
  • Meets SAS 2.1 and proposed SAS 3.0 specifications
  • One metre length for flexible server drive layouts

Enfain Mini SAS HD36P SFF-8643 to 4×SATA 7P cable 1m

This Enfain cable connects a Mini SAS HD SFF-8643 port to four SATA 7-pin drives. It supports signal widths from 6Gb/s to 12Gb/s and meets SAS 2.1 and proposed SAS 3.0 specifications. The 1 metre length suits internal server or workstation storage layouts. Builders adding multiple SATA drives to a single SAS controller port will find it useful.

Thermals noise and power draw in normal use

The passive cable assembly generates no heat and produces no audible noise during operation. It draws no power of its own, only conducting signals between the controller and the attached SATA devices. The high-density 19.01 mm port spacing keeps airflow paths clear inside dense chassis. No active cooling or external power connection is required.

Highlights

  • Connects Mini SAS HD 36-pin to four SATA 7-pin drives
  • Supports signal rates from 6 Gb/s to 12 Gb/s
  • Meets SAS 2.1 and proposed SAS 3.0 specifications
  • One metre length for flexible server drive layouts

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the SFF-8643 end to a 12Gb/s SAS controller and which orientation avoids bent pins?

Align the keyed SFF-8643 plug with the controller receptacle; the 36-pin Mini-SAS HD connector seats in one direction only, so press straight in until the latch clicks — forcing it sideways bends the dense 11 mm pitch contacts.

When should I replace the four SATA 7P tails if drive errors appear?

Swap the cable when SATA connectors show cracked latches, corroded pins or intermittent detection on 6Gb/s drives; the 1 m assembly carries 12Gb/s SAS signals to four 7-pin SATA ports, so any tail damage degrades the link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.