We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 m plastic optical fibre cable, 1.0 mm core, 2.2 mm OD

Enfain

Enfain 4501-4511 Plastic Optical Fiber Cable 10m 1.0mm Core 2.2mm OD

SKU CH-BRD7-ZEVSS

A 10 m plastic optical fibre cable with a 1.0 mm core and 2.2 mm OD, operating from -55 °C to +85 °C with >70 N tensile strength

Length 10m

  • Large bandwidth with EMI immunity for stable signals
  • Withstands -55 to +85 °C for harsh environments
  • PMMA jacket resists wear and corrosion
  • 0 mm core and 0.50 NA suit 650 or 530 nm links
  • >70 N tensile strength handles pulling during install

Product Identity

The Enfain 4501-4511 is a 10 metre single-core plastic optical fiber cable with a 1.0 mm core and 2.2 mm outer diameter. It uses PMMA material for wear and corrosion resistance and operates at 650 or 530 nm wavelength with a numerical aperture of 0.50.

Suitability

This cable suits industrial control, medical and communication links that need immunity to electromagnetic interference and a wide temperature range from -55 to +85 °C. It is not for buyers who require glass fiber bandwidth, connectorised assemblies or higher tensile strength than the rated 70 N.

Installation Notes

The cable is easy to install and connect with no maintenance required, benefiting from precise polishing and a durable PMMA jacket. Take care not to exceed the minimum bend radius implied by the 2.2 mm diameter and avoid pulling forces above 70 N to prevent core damage.

Highlights

  • Large bandwidth with EMI immunity for stable signals
  • Withstands -55 to +85 °C for harsh environments
  • PMMA jacket resists wear and corrosion
  • 0 mm core and 0.50 NA suit 650 or 530 nm links
  • >70 N tensile strength handles pulling during install

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connector or transceiver must I already have to terminate this 1.0 mm core plastic optical fiber?

You need hardware that accepts a 1.0 mm core, 2.2 mm outer diameter plastic fiber operating at 650 nm or 530 nm with a 0.50 numerical aperture.

Will this POF cable work reliably if I keep my existing industrial controller that runs at elevated temperatures?

Yes, the cable is rated for continuous operation from -55 °C to +85 °C and withstands tensile loads above 70 N.

How can I verify the link is performing correctly after I connect the 10 m patch cord?

Measure the received optical power at 650 nm or 530 nm; a healthy link will show low joint loss consistent with the 0.50 NA specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.